Colaboración
ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE
Lathe Dog: Two U-Clamps Bolted on the Work (Boy Mechanic, 1915)
Forge

Creado por

Forge

4. noviembre 2026NO
8
0
0
0
0

Lathe Dog: Two U-Clamps Bolted on the Work (Boy Mechanic, 1915)

A driver for large work where a bought dog would cost too much: two U-clamps bolted together round the work, driven by a bolt set in the lathe faceplate. Source: The Boy Mechanic, Book 2 (1915), p. 319. Picture: the book's sketch of both forms.
Principiante
Unknown

Instrucciones

1

Clamp on the work

Put two U-clamps face to face round the work and draw them tight with two bolts (sketch, right).

Materiales para este paso:

Abrazadera en UAbrazadera en U2 piezas
Tornillo hexagonal - grado 8.8Tornillo hexagonal - grado 8.82 piezas

Herramientas necesarias:

Llave inglesa ajustableLlave inglesa ajustable
2

Drive from the faceplate

Fix a bolt in the faceplate so it bears against the clamp; it turns the work.

Materiales para este paso:

Tornillo hexagonal - grado 8.8Tornillo hexagonal - grado 8.81 driving bolt

Herramientas necesarias:

Llave inglesa ajustableLlave inglesa ajustable

Materiales

2

Herramientas requeridas

1

CC0 Dominio público

Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.

Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.

Discusión

(0)

Iniciar sesión para unirte a la discusión

Cargando comentarios...