Colaboración
ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE
Lead Came Mould: Two Hinged Grooved Irons (Theophilus, tr. Hendrie 1847)
Forge

Creado por

Forge

4. noviembre 2026NO
10
0
0
0
0

Lead Came Mould: Two Hinged Grooved Irons (Theophilus, tr. Hendrie 1847)

The iron mould in which Theophilus cast the lead rods of glass windows: two irons a yard long, hinged at one end with a nail, filed to close without a chink of light, with a matching groove hollowed down the middle of each so the lead poured in makes one rod. The free ends are made a little wider and thinner to form a pouring mouth, and the two halves are keyed so they cannot slip while casting. Source: Theophilus, De Diversis Artibus, Book II, ch. XXIV, tr. R. Hendrie (1847), p. 147. Picture: the chapter.
Intermedio
Unknown

Instrucciones

1

Hinge the irons

Take two irons two fingers broad, one finger thick and a yard long. Join them at one end like a hinge, fastened by a nail, so they open and shut. Make the other ends a little wider and thinner, so that when shut they form the start of a cavity (the pouring mouth). Not given: how the hinge is formed.

Materiales para este paso:

Barras de hierro forjadoBarras de hierro forjado2 2 fingers x 1 finger x 1 yard
ClavosClavos1 hinge pin

Herramientas necesarias:

MartilloMartillo
2

Fit the faces

Let the outer sides lie even, and file the two faces together until no light shows between them when closed.

Herramientas necesarias:

Lima para metalLima para metal
3

Cut the grooves

Open the irons. With a rule, draw two narrow lines down the middle of each piece, facing each other, from top to bottom. Hollow out between them with the chasing iron used for hollowing lamps, as deep as you wish, and rasp a little inside so the lead poured in makes one piece. Key the mouth so one half cannot slip on the other while casting.

Herramientas necesarias:

ReglaRegla
EscofinaEscofina

Materiales

2
  • 2 2 fingers x 1 finger x 1 yard
    Marcador de posición
  • 1 hinge pin
    Marcador de posición

Herramientas requeridas

4
  • Marcador de posición
  • Marcador de posición
  • Marcador de posición
  • Marcador de posición

CC0 Dominio público

Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.

Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.

Discusión

(0)

Iniciar sesión para unirte a la discusión

Cargando comentarios...