ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE

Leather Work Apron, Cut and Saddle-Stitched
A smith's or carpenter's apron is a single hide panel from chest to below the knee that turns sparks, hot scale and slipping tools. Cut it from thick vegetable-tanned leather, rivet on a neck strap and waist ties with a buckle, and stitch on a pocket.
The picture: smiths in their leather aprons outside a blacksmith's shop at Murgon, Queensland, about 1913 (State Library of Queensland).
Principiante
An afternoon
Instrucciones
1
1
Mark and cut
Mark and cut
Mark the apron on the hide with chalk: a rectangle with the top corners cut away in curves for the arms. Cut it with a sharp knife against a ruler.
Materiales para este paso:
Cuero curtido al vegetal1 piezaHerramientas necesarias:
Jaboncillo de sastre
Cúter
Regla2
2
Cut a pocket from an offcut, punch stitching holes with the awl round three sides, and saddle-stitch it on with two needles and waxed linen thread.
Materiales para este paso:
Hilo de lino encerado3 mHerramientas necesarias:
Punzón (lezna)
Aguja de coser3
3
Straps and buckle
Straps and buckle
Punch holes and rivet a neck strap to the top corners and a waist strap at each side, one with a brass buckle, the other with holes for its tongue.
Materiales para este paso:
Correa de cuero3 piezas
Hebilla de latón con clavillo1 pieza
Remaches de hierro8 piezasHerramientas necesarias:
Sacabocados para cuero
Martillo de peña transversal4
4
Finish
Finish
Rub the edges smooth and give the leather a light coat of oil.
Materiales para este paso:
Aceite de linaza0.05 litro5
5
Sizing the bib apron
Sizing the bib apron
Cargando el cuaderno de Jupyter…
Materiales
6- 1 piezaMarcador de posición
- Marcador de posición
- 3 piezasMarcador de posición
- Marcador de posición
- 8 piezasMarcador de posición
- 0.05 litroMarcador de posición
Herramientas requeridas
7- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
Este plano hace
Blueprints relacionados
Estos blueprints comparten conocimiento — técnicas, materiales o principios
CC0 Dominio público
Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.
Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.


