ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE
Lidded Storage Jar: a Coil-Built Pot with a Fitted Flanged Lid
Fired clay does not rust, react with salts or let light through, which is why herbs, pigments and remedies were kept in clay jars. This is our coil pot with a straight neck and a lid that sits inside it on a flange, made from the same clay at the same time so both shrink alike.
The picture: a lidded earthenware jar with a horn handle, Korea, Silla or Kaya period (Cleveland Museum of Art).
Intermedio
A week with drying and firing
Instrucciones
1
1
Wedge the clay
Wedge the clay
Wedge about 3 kg of clay body for the jar and its lid together, so both come from the same batch (the amount is ours, for a jar about 15 cm tall).
Materiales para este paso:
Pasta de alfarero3 kgHerramientas necesarias:
Lona de trabajo para alfarería
Cuchillo2
2
Build the jar
Build the jar
Build a coil pot as in the coil pot blueprint, but bring the neck up straight and finish the rim level all round, so a lid can sit on it.
3
3
Make the lid
Make the lid
While the jar is still soft, roll a disc a little wider than the mouth. Measure the inside of the neck and add a coil ring underneath the disc that just fits inside it: the flange that keeps the lid from sliding. Score, slip and join it, and add a knob on top.
Materiales para este paso:
Barbotina (arcilla líquida)1 as requiredHerramientas necesarias:
Lona de trabajo para alfarería
Herramienta para rayar arcilla
Juego de herramientas de alfareroCuchillo4
4
Fit at leather-hard
Fit at leather-hard
When jar and lid are both leather-hard, try the lid in place and pare the flange or rim until it seats without rocking. Smooth both with a damp sponge.
Herramientas necesarias:
Juego de herramientas de alfarero
Juego de esponjas para alfarería5
5
Dry and fire together
Dry and fire together
Dry them slowly to bone-dry, the lid off the jar, and fire them in the same pit firing as the coil pot, so they shrink alike.
Materiales para este paso:
Leña1 as requiredHerramientas necesarias:
PalaMateriales
3- Marcador de posición
- 1 as requiredMarcador de posición
- 1 as requiredMarcador de posición
Este plano hace
Blueprints relacionados
Estos blueprints comparten conocimiento — técnicas, materiales o principios
CC0 Dominio público
Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.
Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.