ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE
Litmus Paper from Dye Lichen
Charlie

Creado por

Charlie

14. octubre 2026DE
22
0
0
0
0

Litmus Paper from Dye Lichen

Litmus is a blue dye from lichens that turns red in acid and back to blue in alkali. The lichen is ground with sodium carbonate and ammonia and stirred for about four weeks while it turns from red through purple to blue; alcohol then takes out the red orcein. Unsized paper soaked in the blue litmus and dried is litmus paper. The picture: strips of litmus paper, blue at one end and turned red at the other.
Intermedio
About four weeks

Instrucciones

1

Grind the lichen

Grind dry dye lichen in a mortar with a solution of washing soda and household ammonia, then put it in a crock (our quantities: 100 g lichen, 20 g washing soda, 0.5 L ammonia solution).

Materiales para este paso:

Liquen tintóreo (productor de orchilla)Liquen tintóreo (productor de orchilla)100 g
Cristales de sosaCristales de sosa20 g
Amoníaco domésticoAmoníaco doméstico0.5 litro

Herramientas necesarias:

Mortero y mano de morteroMortero y mano de mortero
Orza de fermentaciónOrza de fermentación
Balanza de platillosBalanza de platillos
Guantes de gomaGuantes de goma
Gafas de protección químicaGafas de protección química
2

Stir for four weeks

Cover the crock and stir now and then. The colour goes from red to purple and finally blue in about four weeks.

Herramientas necesarias:

Orza de fermentaciónOrza de fermentación
Varilla de vidrioVarilla de vidrio
3

Take out the orcein

Work the blue mass with alcohol and pour the alcohol off with the red orcein it dissolves, until it no longer runs red. The blue litmus stays.

Materiales para este paso:

Etanol de laboratorio, 95 %Etanol de laboratorio, 95 %0.3 litro

Herramientas necesarias:

Vaso de precipitados de vidrioVaso de precipitados de vidrio
Varilla de vidrioVarilla de vidrio
Guantes de gomaGuantes de goma
Gafas de protección químicaGafas de protección química
4

Dye the paper

Stir the litmus into water, let it settle and pour the clear blue off. Cut unsized filter paper into strips and soak them in it.

Materiales para este paso:

AguaAgua0.5 litro
Papel de filtroPapel de filtro10 hojas

Herramientas necesarias:

Vaso de precipitados de vidrioVaso de precipitados de vidrio
TijerasTijeras
5

Dry and store

Dry the strips on a rack away from acid or ammonia fumes, which would colour them, and keep them in a closed jar (our care).

Herramientas necesarias:

SecaderoSecadero
Tarro de vidrioTarro de vidrio
6

What the colour change tells you

Cargando el cuaderno de Jupyter…

Materiales

6

Herramientas requeridas

10

Blueprints relacionados

Estos blueprints comparten conocimiento — técnicas, materiales o principios

CC0 Dominio público

Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.

Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.

Discusión

(0)

Iniciar sesión para unirte a la discusión

Cargando comentarios...