ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE

Nylon Salt: Hexamethylenediamine and Adipic Acid Crystallized from Alcohol, Carothers 1938
Equal moles of hexamethylenediamine and adipic acid, warmed in watery alcohol until they dissolve, crystallize on cooling as white nylon salt (Carothers, du Pont, US 2,130,947, 1938). The salt always holds the two exactly one to one, which is what makes the nylon come out right.
The picture: our drawing of the warm flask, the crystals and the filter.
Intermedio
A day
Instrucciones
1
1
Weigh one mole each
Weigh one mole each
Weigh 144 g hexamethylenediamine and 174 g adipic acid: one mole of each.
Materiales para este paso:
Hexametilendiamina144 g
Ácido adípico174 gHerramientas necesarias:
Báscula digital de cocina2
2
Warm to dissolve
Warm to dissolve
Put both in a flask with 1300 g of 95 % alcohol and 210 g water. Warm until everything dissolves. Keep flames away from the alcohol.
Herramientas necesarias:
Matraz Erlenmeyer
Placa calefactora
Etanol de laboratorio, 95 %
Agua destilada3
3
Cool and filter
Cool and filter
Cool the solution. The salt separates as white crystals. Filter them off.
Herramientas necesarias:
Embudo Buchner (de porcelana)
Bomba de vacío4
4
Recrystallize
Recrystallize
Dissolve the crystals warm in 1300 g of 95 % alcohol and 200 g water, cool and filter again. Carothers got 247 g, melting at 183–184 °C.
Herramientas necesarias:
Matraz Erlenmeyer
Placa calefactora
Etanol de laboratorio, 95 %
Agua destilada
Embudo Buchner (de porcelana)
Bomba de vacío5
5
Check the balance
Check the balance
For an exact one-to-one salt, the pH of its solution sits at the turning point of the titration curve, about 7.6 for this pair.
Herramientas necesarias:
pH-metro y equipo de valoración6
6
Moles
Moles
Cargando el cuaderno de Jupyter…
Materiales
2- 144 gMarcador de posición
- 174 gMarcador de posición
Herramientas requeridas
8- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
- 1 vendor sell this, none ship to you yetMarcador de posición
- Marcador de posición
Este plano hace
Blueprints relacionados
Estos blueprints comparten conocimiento — técnicas, materiales o principios
CC0 Dominio público
Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.
Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.


