Colaboración
ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE

Plate Shears: Bench Shears Made from a Flat File (Shop Notes, 1919)
Bench shears for sheet metal too heavy for hand snips: a 14 in flat file, ground and sharpened, works as a lever knife bolted against a fixed cutter forged from scrap steel and fastened to the bench.
Source: Popular Mechanics Shop Notes for 1919, p. 3271. Unknown: cutter and bolt sizes. Picture: the book's photo and drawing.
Intermedio
Unknown
Instrucciones
1
1
Make the moving knife
Make the moving knife
Take a 14 in flat file. Grind one side smooth and sharpen part of the tip and one edge. Heat it cherry red and punch the bolt hole.
Materiales para este paso:
Lima para metal1 14 in flat fileHerramientas necesarias:
Esmeril de banco
Fragua
Tenazas
Punzón en caliente
Martillo2
2
Forge the fixed cutter
Forge the fixed cutter
Forge the fixed cutter from part of an old plowshare or other suitable scrap steel, bent as in the drawing so it can be screwed to the bench, with a hole for the pivot bolt.
Materiales para este paso:
Barra de acero al carbono (0,6 % C)1 scrap steelHerramientas necesarias:
Fragua
Tenazas
Martillo
Punzón en caliente3
3
Assemble on the bench
Assemble on the bench
Screw the fixed cutter to the bench and bolt the file knife to it. Use a locknut on the bolt, or rivet the end over.
Materiales para este paso:
Tornillo hexagonal - grado 8.81 pieza
Tuerca hexagonal2 nut and locknut
Tornillos para madera1 piezaHerramientas necesarias:
Llave inglesa ajustable
Destornillador planoMateriales
5- 1 14 in flat fileMarcador de posición
- 1 scrap steelMarcador de posición
- Marcador de posición
- 2 nut and locknutMarcador de posición
- 1 piezaMarcador de posición
Este plano hace
CC0 Dominio público
Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.
Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.
