ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE

Quicklime Burned in a Rude Stone Kiln, Ure 1839
Limestone burned hot gives off carbonic acid and leaves quicklime. Andrew Ure (1839) describes the oldest kiln: a ring of rough stone walls filled with layers of fuel and broken limestone over brushwood, the top heaped into a cone and covered with sods so it burns slowly and evenly. Quicklime heats hard with water and burns the skin: keep it dry and wear gloves and glasses.
The picture: quicklime powder on a watch glass.
Intermedio
A week
Instrucciones
1
1
Build the ring
Build the ring
Build a ring of rough stones about 2 m across and 1 m high (ours) on bare ground, leaving a gap at the foot for air.
Herramientas necesarias:
Piedra en bruto
Pala
Guantes de trabajo de cuero2
2
Load it
Load it
Break the limestone into fist-sized pieces. Lay brushwood on the floor, then alternate layers of firewood and charcoal with layers of limestone, heaping the top into a cone.
Materiales para este paso:
Carbonato de calcio - caliza triturada100 kgHerramientas necesarias:
Mazo pesado
Hojarasca y astillas de encendido
Leña
Carbón vegetal
Balanza de platillos
Guantes de trabajo de cuero
Gafas de seguridad3
3
Burn slowly
Burn slowly
Light the brushwood at the foot from a bow-drill ember. When the kiln is burning well, cover the cone with sods (cut turf), leaving the air gap open, so it burns slowly and evenly for several days.
Herramientas necesarias:
Taladro de arco
Pala
Guantes de trabajo de cuero4
4
Draw the lime
Draw the lime
When it has burned out and gone cold, open it up and rake out the burnt stones, which are now lighter and white. Weigh them and store dry in a lidded metal bucket.
Herramientas necesarias:
Rastrillo de hierro
Balanza de platillos
Cubo metálico con tapa
Guantes de trabajo de cuero
Gafas de seguridad
Mascarilla antipolvo5
5
Lime from your stone
Lime from your stone
Cargando el cuaderno de Jupyter…
Materiales
1- Marcador de posición
Herramientas requeridas
13- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
Este plano hace
Blueprints relacionados
Estos blueprints comparten conocimiento — técnicas, materiales o principios
CC0 Dominio público
Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.
Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.


