Colaboración
ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE
Self-Healing Cutting Mat: Cork Pinning Side and PVC Cutting Side, Tri-Fold (Carnegie, US 11,077,575)
A self-healing cutting mat has a PVC face that closes up again after a rotary cutter runs over it. L. V. Carnegie (US 11,077,575, 2021) glues a cork layer to the back of the PVC layer, so the same board takes straight pins on one side and cutting on the other, and scores it so it folds in three for storage.
Which PVC heals is not given: Carnegie only says PVC mats are self-healing.
Source: L. V. Carnegie, US Patent 11,077,575 (filed 2018, granted 2021). Picture: its Figs. 1 and 3.
Principiante
Unknown
Instrucciones
1
1
Read Carnegie
Read Carnegie
"Polyvinyl chloride (PVC) mats provide a rigid, self-healing surface on which a rotary cutter may be used ... Fabrics and crafts cannot be pinned directly to PVC mats".
2
2
Cut the two layers
Cut the two layers
Cut a PVC sheet and a cork sheet to the same size. Carnegie: each layer 1/8 to 1/2 in. thick (cork 1/4 to 1/2 in.); one mat is 72 in. long by 40 in. wide, but any size will do. The PVC grade that self-heals is not given.
Materiales para este paso:
Plancha de PVC1 cutting layer, self-healing grade not given
Plancha de corcho1 pinning layerHerramientas necesarias:
Cúter
Regla de trazar
Cinta métrica
Dimensiones desconocidas3
3
Glue them back to back
Glue them back to back
Glue the cork to the back of the PVC so the cork face takes pins and the PVC face takes the cutter. Carnegie allows glue, screws, rivets, magnets or a case; the glue is not given.
Materiales para este paso:
Material desconocido1 glue, not givenHerramientas necesarias:
Rodillo de laminar4
4
Score the folds and mark the grid
Score the folds and mark the grid
Score two lines across the full width, partly or fully through the layers, so the mat folds into three panels with its faces inward. Print measured grid lines on either face, or stick on a printed paper grid. How deep to score is not given.
Herramientas necesarias:
CúterRegla de trazar5
5
Use it
Use it
Unfold the mat flat. Pin fabric and paper patterns to the cork side; turn it over and cut on the PVC side with a rotary cutter. Fold it up for storage.
Materiales
3- 1 cutting layer, self-healing grade not givenMarcador de posición
- 1 pinning layerMarcador de posición
- 1 glue, not givenMarcador de posición
Herramientas requeridas
5- Marcador de posición
- Marcador de posición
- 1 vendor sell this, none ship to you yetMarcador de posición
- Marcador de posición
- Marcador de posición
Este plano hace
CC0 Dominio público
Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.
Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.