ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE
Spray-Jet Dishwasher Arm
Martin

Creado por

Martin

22. septiembre 2026NO
56
0
0
0
0

Spray-Jet Dishwasher Arm

Josephine Cochrane's machine, already published, held the dishes in wire racks and threw water at them from fixed jets while the rack was turned. Robert Tatham's rung makes the water do the moving: jets angled off the radius push the arm round, so a pump and one moving part wash a stationary load from every direction. **US 1,900,529**, "Dishwasher", Robert L. Tatham, filed 29. June 1929, granted 7. March 1933: apparatus for "washing dishes by discharging water with considerable force, in the form of jets or sprays", delivered by a pump. Every domestic dishwasher since has a reaction-driven spray arm. **You build the arm** from PVC pipe on a bearing, fed by a submersible pump, and measure its speed and how much of a dirty plate it actually cleans.
Intermedio
3 hours

Instrucciones

1

Drill the arm

Cap both ends of a 200 mm length of 20 mm PVC pipe. Drill six 2 mm holes along it, three each side of centre, all angled about 20 degrees off straight-out and all the same way round.

Materiales para este paso:

Tubo de PVCTubo de PVC1 pieza
Surtido de accesorios para tubo de PVCSurtido de accesorios para tubo de PVC1 juego

Herramientas necesarias:

Taladro inalámbricoTaladro inalámbrico
Juego de brocasJuego de brocas
ReglaRegla
2

Hang it on a bearing

Fit a ball bearing at the arm's centre on a short stub of pipe so it spins freely, and connect the pump to the stub with vinyl tubing. Keep the tubing slack so it cannot drag.

Materiales para este paso:

Rodamiento de bolasRodamiento de bolas1 pieza
Tubo de vinilo transparenteTubo de vinilo transparente1 metro

Herramientas necesarias:

Pistola de cola calientePistola de cola caliente
3

Measure the flow

Run the pump into a graduated cylinder for 15 seconds and work out litres per minute. Do it again with the pump half-throttled by pinching the tube.

Herramientas necesarias:

Bomba de agua sumergibleBomba de agua sumergible
CuboCubo
Probeta graduadaProbeta graduada
CronómetroCronómetro
4

Dirty a plate

Paint a ceramic plate with a paste of flour and food colouring and let it dry hard. Stand it in the bucket above the arm.

Materiales para este paso:

Harina comúnHarina común50 g
Colorante alimentarioColorante alimentario5 ml

Herramientas necesarias:

Bandeja de cerámicaBandeja de cerámica
5

Run, count, compare

Run for one minute, counting arm revolutions in 30 seconds. Photograph the plate and estimate the share cleaned. Repeat with the arm locked still, and at half flow.

Herramientas necesarias:

CronómetroCronómetro
Cinta de carroceroCinta de carrocero
6

Reaction speed and coverage

Cargando el cuaderno de Jupyter…
7

History & Context

**What the patent specifies:** washing by forceful jets or sprays delivered by a pump against dishes held in a tray. **Modern build (derived):** a reaction-driven PVC arm and an aquarium pump. Later machines added a second arm above, a heater to keep the wash hot, and a detergent dispenser timed to the cycle. Its limits: a jet cannot clean what it cannot reach, so loading matters; burnt-on food still needs soaking; and the arm stalls if cutlery drops through the rack.
Paso 7 - Image 1

Materiales

6

Herramientas requeridas

10

Blueprints relacionados

Estos blueprints comparten conocimiento — técnicas, materiales o principios

CC0 Dominio público

Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.

Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.

Discusión

(0)

Iniciar sesión para unirte a la discusión

Cargando comentarios...