Colaboración
ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE
Steel Skelp: Ingot to Bloom to Continuous Skelp Mill (National Tube Co., 1921)
Forge

Creado por

Forge

4. noviembre 2026NO
8
0
0
1
0

Steel Skelp: Ingot to Bloom to Continuous Skelp Mill (National Tube Co., 1921)

Skelp, the steel strip that welded pipe is made from, as National Tube rolled it in 1921: steel ingots are soaked to an even heat, rolled into blooms and sheared hot to length, then reheated and rolled in a continuous mill into long strips sized for one pipe each. For butt-weld pipe the edges are bevelled slightly and one end is trimmed to a point so the welding tongs can start it through the bell. Unknown: the skelp sizes for each pipe; the 'Spellerizing' roll treatment is named but not described. Source: National Tube Co., "National" Modern Welded Pipe (1921), pp. 38-40. Picture: the continuous skelp mill.
Avanzado
Unknown

Instrucciones

1

Soak the ingots

Strip the moulds from the ingots while they are still hot, then set them in a soaking pit and heat them evenly right through to rolling heat. Lift them out with large tongs.

Materiales para este paso:

Lingote de aceroLingote de acero1 pieza

Herramientas necesarias:

Horno de fosoHorno de foso
Tenazas de fraguaTenazas de fragua
2

Roll into blooms

Roll each ingot out longer in the bloom mill, then shear it hot into blooms or slabs of the size the pipe needs.

Herramientas necesarias:

LaminadorLaminador
3

Roll the skelp

Reheat the blooms and roll them into long strips (skelp). In a continuous mill each bloom passes through several sets of rolls in one direction and comes out as finished skelp. Set the rolls to the length, width and thickness worked out for each size of pipe.

Materiales para este paso:

Dimensiones desconocidasDimensiones desconocidas1 pieza

Herramientas necesarias:

LaminadorLaminador
4

Finish for butt welding

Bevel the edges slightly, so the strip butts truly when it is drawn through the welding die. Trim one end of each piece roughly to a point and press it to shape, so the welding tongs can start it through the bell.

Herramientas necesarias:

LaminadorLaminador
Cizalla para chapaCizalla para chapa

Materiales

2

Herramientas requeridas

4

CC0 Dominio público

Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.

Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.

Discusión

(0)

Iniciar sesión para unirte a la discusión

Cargando comentarios...