Colaboración
ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE
Stop-Out Varnish: Turpentine and Resin with Lampblack (Spon's Workshop Receipts)
The etcher's stopping-out varnish from Spon's Workshop Receipts: resin dissolved in spirits of turpentine in a warm water bath, coloured with a little lampblack, and brushed over the parts of the plate that must not bite further.
Spon rates it better than Brunswick black; it sets hard overnight and can be thinned again with turpentine.
Source: E. Spon, Workshop Receipts (first series), pp. 155-156. Picture: the book's text.
Principiante
Overnight to set
Instrucciones
1
1
Dissolve the resin
Dissolve the resin
Break small pieces of resin into a phial and pour spirits of turpentine over to about twice the height of the resin. Stand the bottle in a small saucepan of water kept hot on the hob, with a cork laid lightly in its mouth, and shake it now and then.
Materiales para este paso:
Resina de pino1 small pieces
Trementina1 to twice the height of the resinHerramientas necesarias:
Botella de vidrio (transparente)
Cazo alto
Agua2
2
Colour with lampblack
Colour with lampblack
Pour a small portion into a small pot, add a little lampblack to give it colour, and work it well together with the camel-hair pencil so there are no lumps.
Materiales para este paso:
Negro de humo de lámpara1 a littleHerramientas necesarias:
Pinceles finos3
3
Apply and set
Apply and set
Brush it over the parts to be stopped out, or over the margin of the plate; left a night it sets hard. It is dry when a finger can be laid on it without sticking. Thin it again with a little turpentine.
Herramientas necesarias:
Pinceles finosTrementinaMateriales
3- 1 small piecesMarcador de posición
- 1 to twice the height of the resinMarcador de posición
- 1 a littleMarcador de posición
Este plano hace
CC0 Dominio público
Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.
Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.