ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE
The Gripping Shoe Horn: A Jaw That Locks Over Centre
Martin

Creado por

Martin

28. septiembre 2026NO
17
0
0
0
0

The Gripping Shoe Horn: A Jaw That Locks Over Centre

A shoe horn lets the heel slide past the back of the shoe. On a low shoe with no strap, the shoe itself slips away as the foot pushes, so there is nothing to pull against. Elmer E. Wolf of Springfield, Ohio, received US 466,643, dated 5 January 1892 (filed 17 January 1891), for a shoe-horn with a pivoted clamping-piece "adapted to take hold of or grip a shoe". A cam on the handle gives a "setting action" that "occurs as soon as the point e arrives in line with or passes the pivot F of the handle and clamping-piece". This rung works out why an over-centre clamp holds itself shut, then builds one in card and puts on a shoe with and without a horn.
Principiante
About 1 hour

Instrucciones

1

Before the line, and past it

Cargando el cuaderno de Jupyter…
2

The tool for taking the boot off

The embedded blueprint is the 1866 boot-jack, which grips the heel to pull a boot off; the shoe horn grips it to get the shoe on.
3

Read US 466,643

"My invention relates to certain new and useful improvements in shoe-horns; and the object of my improvements is to provide a device adapted to take hold of or grip a shoe and maintain its temporary position thereon by a setting action and allow of yet further gripping action on the said shoe in putting it on the foot." "As ordinarily formed the shoe-horn has no gripping action on the shoe itself to assist in its adjustment on the foot, and my device is especially adapted for low-cut shoes, or those not provided with a back strap." The clamping-piece has "a rubber lining-surface D, corrugated or otherwise adapted to promote the contact of the clamping device with the leather without marring the same." "This setting action of the handle and clamping-piece occurs as soon as the point e arrives in line with or passes the pivot F of the handle and clamping-piece. The farther this bearing-point e passes said pivot the greater the setting action, since any pressure on the clamping-piece tending to force it outward or open the jaws will only tend to force this point e still farther past the pivot."
4

Putting a shoe on, as a program

Espacio de trabajo Blockly

Loading Blockly workspace...

5

Build an over-centre lock in card, then time a shoe

Cut a jaw and a handle from stiff card. Pivot the jaw to a base strip with a nail pushed through an awl hole, and hinge the handle to the jaw so that its end presses on the base. Push the handle down slowly and feel the moment it snaps past the line and holds. Press on the jaw: before the snap it opens, after it stays shut. Then put on a snug low shoe ten times without a horn and ten times with one, timing each, and hook the force meter into the heel to feel how hard the shoe has to be held.

Materiales para este paso:

Plantillas de cartónPlantillas de cartón1 pieza
Clavos de hierroClavos de hierro1 pieza

Herramientas necesarias:

CalzadorCalzador
Punzón (lezna)Punzón (lezna)
CronómetroCronómetro
Dinamómetro (balanza de resorte)Dinamómetro (balanza de resorte)
ReglaRegla
6

A clamp that will not hold, or will not let go

Over-centre clamp troubleshooting.

Flow

Loading...
7

History and honest limits

**Elmer E. Wolf** of Springfield, Ohio, filed US 466,643 on 17 January 1891; it is dated 5 January 1892. He writes that a salesman can set the horn on the heel and hand it to the buyer, whose own pull then tightens the grip. **Honest limits.** The notebook treats the handle as a rigid lever with a point contact and ignores friction at the cam, which in practice makes the lock hold a little before the line. The huge grips near the line are never reached: the jaw lining, the shoe and the card give first. Lengths and forces are examples. Your times and force readings are the measurement.

Materiales

2

Herramientas requeridas

5

CC0 Dominio público

Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.

Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.

Discusión

(0)

Iniciar sesión para unirte a la discusión

Cargando comentarios...