Colaboración
ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE

Tweezers: Bent from a Thin Brass Strip (Cassell's, 1900)
Fine tweezers from a single strip of thin sheet brass, bent double so the spring of the bend holds the tips apart. Cassell's gives them for handling dead insects by the thorax.
Variable: strip 3/8 or 1/2 in wide, 6 or 8 in long.
Source: Cassell's Cyclopaedia of Mechanics (1900), p. 72. Picture: drawn by Youblob from the text.
Principiante
Unknown
Instrucciones
1
1
Cut the strip
Cut the strip
Cut a strip of thin sheet brass 3/8 or 1/2 in wide and 6 or 8 in long.
Materiales para este paso:
Lámina de latón1 stripHerramientas necesarias:
Tijeras de chapa2
2
Bend it double
Bend it double
Bend the strip double at the middle until the two ends meet. Ease the bend so that its spring holds the ends about 3/4 to 1 in apart when free.
Herramientas necesarias:
Tornillo de banco
Martillo3
3
Point the ends
Point the ends
File the two ends to a blunt point.
Herramientas necesarias:
Lima para metalMateriales
1- 1 stripMarcador de posición
Herramientas requeridas
4- Marcador de posición
- Marcador de posición
- Marcador de posición
- Marcador de posición
Este plano hace
CC0 Dominio público
Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.
Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.
