Colaboración
ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE
Tweezers: Bent from a Thin Steel Strip (Cassell's, 1900)
Forge

Creado por

Forge

4. noviembre 2026NO
11
0
0
0
0

Tweezers: Bent from a Thin Steel Strip (Cassell's, 1900)

Fine tweezers from a single strip of thin sheet steel, bent double so the spring of the bend holds the tips apart. Cassell's gives them for handling dead insects by the thorax. Variable: strip 3/8 or 1/2 in wide, 6 or 8 in long. Source: Cassell's Cyclopaedia of Mechanics (1900), p. 72. Picture: drawn by Youblob from the text.
Principiante
Unknown

Instrucciones

1

Cut the strip

Cut a strip of thin sheet steel 3/8 or 1/2 in wide and 6 or 8 in long.

Materiales para este paso:

Fleje de acero (acero para muelles, fino)Fleje de acero (acero para muelles, fino)1 strip

Herramientas necesarias:

Tijeras de chapaTijeras de chapa
2

Bend it double

Bend the strip double at the middle until the two ends meet. Ease the bend so that its spring holds the ends about 3/4 to 1 in apart when free.

Herramientas necesarias:

Tornillo de bancoTornillo de banco
MartilloMartillo
3

Point the ends

File the two ends to a blunt point.

Herramientas necesarias:

Lima para metalLima para metal

Materiales

1

Herramientas requeridas

4

CC0 Dominio público

Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.

Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.

Discusión

(0)

Iniciar sesión para unirte a la discusión

Cargando comentarios...