Collaboration
ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE
Air Compressor: Twin Pump-Cylinder, Water-Cooled (Shop Notes, 1912)
Emma

Créé par

Emma

4. novembre 2026SE
12
0
0
0
0

Air Compressor: Twin Pump-Cylinder, Water-Cooled (Shop Notes, 1912)

A simple compressor that fills a tank to about 50 lb: two bought cast-iron well-pump cylinders, 2 1/2 in bore, driven alternately by a rocking arm from a crank, with check valves in and out and a water jacket pipe to cool them. Source: Popular Mechanics Shop Notes for 1912, pp. 1708-1709. Unknown: tank, pipe sizes. Picture: Figs. 1-2 of the book.
Intermédiaire
Unknown

Consignes

1

Pipe the two cylinders

Take two ordinary cast-iron open-well pump cylinders, 2 1/2 in bore, bought complete with guide rods and plungers. Join their open ends with tees to a cross pipe C, and fit a packing box from an old valve (A, B) into each tee so the plunger rods D and E pass through (Fig. 1).

Matériaux pour cette étape :

Métal inconnuMétal inconnu2 pump cylinders with plungers
Tube d'acier (à paroi épaisse, bouts filetés)Tube d'acier (à paroi épaisse, bouts filetés)1 pipe C
Raccord fileté pour tuyauterieRaccord fileté pour tuyauterie2 tees
Garniture inconnueGarniture inconnue2 packing boxes

Outils nécessaires :

Clé à tubeClé à tube
2

Fit the valves

On the outer end of each cylinder fit an inlet check valve (H, I) and an outlet valve (J, K), the outlets joined to pipe L running to the tank.

Matériaux pour cette étape :

Clapet anti-retourClapet anti-retour4 H, I, J, K
Tube d'acier (à paroi épaisse, bouts filetés)Tube d'acier (à paroi épaisse, bouts filetés)1 pipe L
Raccord fileté pour tuyauterieRaccord fileté pour tuyauterie1 pièce
Matériau inconnuMatériau inconnu1 air tank

Outils nécessaires :

Clé à tubeClé à tube
3

Water-cool it

Run cooling water through pipe C, set by valve M in and valve N out, so there is no pressure on the water to push it into the air chambers O and P.

Matériaux pour cette étape :

Robinet à soupapeRobinet à soupape2 M and N

Outils nécessaires :

EauEau
Clé à tubeClé à tube
4

Fit the crank drive

Drive it from a shaft (Fig. 2): crank S works an arm pivoted at its centre T, and the plunger rods D and E attach to the arm's ends U and V.

Matériaux pour cette étape :

Métal inconnuMétal inconnu1 crank, arm
Boulon à tête hexagonale - classe 8.8Boulon à tête hexagonale - classe 8.81 pivot and rod pins, number not given

Outils nécessaires :

Chignole à mainChignole à main
Clé à moletteClé à molette

Matériaux

8

Outils requis

4

CC0 Domaine public

Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.

Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.

Commentaires

(0)

Se connecter pour participer à la discussion

Chargement des commentaires...