Collaboration
ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE
Air Thermometer: Blackened Tin Box and Water U-Tube (Boy Mechanic, 1913)
Penny

Créé par

Penny

14. novembre 2026DK
10
0
0
0
0

Air Thermometer: Blackened Tin Box and Water U-Tube (Boy Mechanic, 1913)

A sensitive air thermometer: a small sealed tin box, blackened on its face, breathes through a brass tube into a bent glass U-tube holding a little water; warmth on the box expands the air and pushes the water up the scale.
Intermédiaire
Two hours

Consignes

1

Read the Boy Mechanic

"This instrument will measure the amount of heat given by a candle some 20 or 30 ft. away."
2

Seal the box

Take a small tin box about 1-1/4 in deep and 2 in across. Solder a 1 in piece of 1/4 in brass tube into its side, then solder the cover on so air can only escape through the tube.

Matériaux pour cette étape :

Boîte de conserveBoîte de conserve1 pièce
Tube en laitonTube en laiton1 pièce
Soudure étain-plombSoudure étain-plomb1 pièce

Outils nécessaires :

Fer à souderFer à souder
Chignole à mainChignole à main
3

Bend the glass tube

Take 1/4 in glass tube at least 18 in long and bend it into a U as in the figure by holding it across a broad flame until it sags under its own weight. Join it to the brass tube with a short rubber hose, bound with fine copper wire if loose.

Matériaux pour cette étape :

Tube de verreTube de verre1 pièce
Tube en caoutchoucTube en caoutchouc1 pièce
Fil de cuivreFil de cuivre1 pièce

Outils nécessaires :

Brûleur à alcool (lampe à esprit-de-vin)Brûleur à alcool (lampe à esprit-de-vin)
4

Stand and base

Make the standard from No. 10 wire about 10 in long on an oak base, with a No. 14 wire soldered across it and bent round the brass tube and the glass tube.

Matériaux pour cette étape :

Fil de ferFil de fer1 pièce
Planche de chêne blancPlanche de chêne blanc1 pièce
Soudure étain-plombSoudure étain-plomb1 pièce

Outils nécessaires :

Pince platePince plate
Fer à souderFer à souder
Vilebrequin et mècheVilebrequin et mèche
5

Blacken and fill

Smoke the bottom of the box black over a little burning cotton soaked in turpentine (after any painting of the rest). Put water in the U-tube with a dropper and paint a scale on the glass.

Matériaux pour cette étape :

Noir de fumée de lampeNoir de fumée de lampe1 pièce
Peinture noirePeinture noire1 pièce
Eau distilléeEau distillée1 pièce
6

Troubleshooting

Air thermometer troubleshooting.

Flow

Loading...
7

History and honest limits

From **The Boy Mechanic, Book 1** (Popular Mechanics, 1913), pp. 152-153, by J. Thos. Rhamstine (checked on the archive.org scan boymechanic0000unse_n5a8). It shows relative warmth, not degrees. He also mentions etching the scale with hydrofluoric acid; we use paint only. The spirit lamp in place of a gas jet is ours.

Matériaux

11

Outils requis

5

Blueprints liés

Ces blueprints partagent des connaissances — techniques, matériaux ou principes

CC0 Domaine public

Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.

Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.

Commentaires

(0)

Se connecter pour participer à la discussion

Chargement des commentaires...