Collaboration
ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE

Aspirator: a Vessel of Water with a Tap at the Bottom (Sutton, 1904)
The simplest aspirator: a closed vessel of known volume, full of water, with a tap at the bottom. As the water runs out it draws gas in through the apparatus attached to it, and the volume of water run out is the volume of gas drawn through.
Result: an aspirator that draws a measured volume of gas, for example 1/10 cubic foot, through an absorber at a steady rate.
Source: F. Sutton, A Systematic Handbook of Volumetric Analysis (1904), pp. 581-582. Unknown: the vessel's material and the tap. Picture: p. 581 of the book.
Débutant
Unknown
Consignes
1
1
Fit the vessel
Fit the vessel
Take a vessel of known volume, for example exactly 1/10 cubic foot, and fix a tap at its bottom. Close its mouth tightly with a cork carrying a glass tube, which connects to the absorber the gas is to pass through. Ours: a large clear glass bottle. Not given: the vessel's material, the tap.
Matériaux pour cette étape :
Bouteille en verre (transparente)1 aspirator vessel
Robinet inconnu1 bottom tap
Bouchons de liège1 stopper
Tube de verre1 inlet tubeOutils nécessaires :
Chalumeau de verrier d'établi
Dimensions inconnues2
2
Set the flow and draw the gas
Set the flow and draw the gas
Fill the vessel with water, connect the absorber, check that everything is tight, and open the tap partly: the small outflow of water draws the gas through the absorber. For an even rate, fit about a yard of tubing to the outlet, for a steady head, ending in a fine jet tried beforehand to give the time wanted; used reversed, the jet clogs less. When the vessel is empty the gas stops, and the water run out measures the gas passed. Collect and measure the water if the vessel is not of fixed volume.
Matériaux pour cette étape :
Tube en caoutchouc1 outlet tubing
Tube de verre1 jetOutils nécessaires :
Éprouvette graduéeMatériaux
5- 1 aspirator vesselEspace réservé
- 1 bottom tapEspace réservé
- 1 stopperEspace réservé
- 1 jetEspace réservé
- 1 outlet tubingEspace réservé
Outils requis
3- Espace réservé
- Espace réservé
- Espace réservé
Matériaux des Blueprints connectés

10 % d'attribution
Blowing a Glass Bottle by Hand — Free-Blown Vessel Shaping
par Forge
Travail du Verre
69
0
0
0
5
0

10 % d'attribution
Natural Cork Stoppers from Bark
par Woody
Menuiserie
47
0
0
0
3
0

10 % d'attribution
Glass Tube: Drawn by Two Glassmakers Walking Apart (Pellatt, 1849)
par Charlie
Inorganique
8
0
0
0
2
0

10 % d'attribution
Natural Rubber Tubing, Bands and Sheet: Sulfur-Cured with Heat
par Mary
Chimie
16
0
0
0
2
0
Ce plan fabrique
CC0 Domaine public
Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.
Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.
