Collaboration
ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE

Blackfoot Parfleche: Rawhide Pegged Out, Fleshed, Painted While Staked, Scraped Even, Cut and Folded Like an Envelope (Wissler, 1910)
The Blackfoot (Niitsitapi) parfleche as Clark Wissler recorded it: a cow or buffalo hide pegged out hair side down, fleshed, sun-cured, painted with several parfleche designs at once while still staked, planed even with an adze-like scraper, then cut out, folded like an envelope and closed with rawhide laces. It held pemmican, dried meat and berries.
Intermédiaire
A week, mostly sun-curing
Consignes
1
1
Read Wissler
Read Wissler
"Its simplicity of construction is inspiring and its usefulness scarcely to be over-estimated."
2
2
Peg out and flesh
Peg out and flesh
Stretch the fresh hide on the ground hair side down and peg it with wooden stakes. Rake and hack off the flesh and fat with a fleshing tool; if the hide stiffens, wet it with warm water.
Matériaux pour cette étape :
Cuir vert1 pièce
Eau1 pièceOutils nécessaires :
Sardine de tente
Maillet en bois
Couteau à écharner3
3
Cure in the sun
Cure in the sun
Leave it to cure and bleach in the sun for some days, now and then pouring warm water over it.
Matériaux pour cette étape :
Eau1 pièceOutils nécessaires :
Sardine de tente4
4
Lay out and paint
Lay out and paint
While it is still staked, mark out as many parfleche as the hide will take (his Fig. 45: a 160 cm steer hide with two parfleche, two bags and three toy parfleche) and paint the designs. Ours: earth paints with a little water, laid on with a brush.
Matériaux pour cette étape :
Ocre brute1 pièce
Pigment d'ocre jaune (brut)1 pièce
Charbon de bois1 pièceOutils nécessaires :
Pinceaux fins
Couteau5
5
Scrape it even
Scrape it even
Pull the stakes and lay the stiff hide in shade. Stand on it, lean over and plane the flesh side down to an even thickness with an adze-like scraper, sideways strokes taking off chips and shavings; turn it and scrape the hair off the same way.
Outils nécessaires :
Herminette6
6
Cut, fold and lace
Cut, fold and lace
Mark the outlines with a knife point and cut them out (Fig. 46: a long rectangle with a big flap; sides irregular). Trim, and make pairs of lace holes (ours: a punch). Fill it by putting the contents in the middle, fold the big flap over and lace it, turn in the ends and lace them, then tie it shut with the looped thongs. Blackfoot ones average 60 x 38 cm.
Matériaux pour cette étape :
Lacet de cuir brut1 pièceOutils nécessaires :
Couteau
Emporte-pièce pour cuir7
7
Troubleshooting
Troubleshooting
Parfleche troubleshooting.
Flow
Loading...
8
8
History and honest limits
History and honest limits
From Clark Wissler, *Material Culture of the Blackfoot Indians*, **Anthropological Papers of the American Museum of Natural History** vol. V (1910), pp. 63-64, 79-81 and Figs. 45-47 (checked on the archive.org scan materialcultureo00wiss). By 1910 parfleche were kept as mementos of buffalo days and given as gifts, often ending up cut into moccasin soles. Wissler does not say what paints were used here; the paints, brush and punch are ours.
Matériaux
6- 1 pièceEspace réservé
- 2 piècesEspace réservé
- 1 pièceEspace réservé
- 1 pièceEspace réservé
- 1 pièceEspace réservé
- 1 pièceEspace réservé
Outils requis
7- Espace réservé
- Espace réservé
- Espace réservé
- Espace réservé
- Espace réservé
- Espace réservé
- Espace réservé
Ce plan fabrique
Blueprints liés
Ces blueprints partagent des connaissances — techniques, matériaux ou principes

Navajo Buckskin: Hair Shaved with the Deer's Own Foreleg Bone, Brains Rubbed In, Wrung on a Tree, Worked Dry over the Feet (Shufeldt, 1888)
par Tex
Textile et Cuir
4
0
0
0
0
0

Blackfoot Face Paints: Yellow Earth Burned Red, Earths Applied Wet or Worked into Tallow on the Face (Wissler, 1910)
par Charlie
Peinture
4
0
0
0
0
0
CC0 Domaine public
Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.
Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.
