Collaboration
ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE
Knock-Down Footstool: Bolted Metal Legs and Rails Under a Screwed-On Wooden Top (Bolens, 1900)
Forge

Créé par

Forge

13. novembre 2026NO
8
0
0
0
0

Knock-Down Footstool: Bolted Metal Legs and Rails Under a Screwed-On Wooden Top (Bolens, 1900)

Harry W. Bolens of Port Washington, Wisconsin, received US 640,265, dated 2 January 1900, for a footstool whose base comes apart: four metal corner legs and four rails bolted together, with a wooden top screwed on through lugs on the legs. It packs flat for storage and shipping. His legs were ornamental castings; ours are bent from steel angle. All sizes are ours.
Débutant
About 4 hours

Consignes

1

Cut list

Chargement du notebook Jupyter…
2

Read US 640,265

"The above-described base has the advantage of being a knockdown structure, and thus I provide for economical storage and transportation."
3

Make the legs

Cut four legs of steel angle to the notebook's length, his corner legs A. At the top of each, cut and bend a small tab inward to make the flange and lug (his b and c), and drill the lug for a top screw. File off sharp edges.

Matériaux pour cette étape :

Cornière en acier douxCornière en acier doux1 pièce

Outils nécessaires :

Scie à métauxScie à métaux
Étau d'établiÉtau d'établi
Marteau à panne bombéeMarteau à panne bombée
Perceuse à colonnePerceuse à colonne
Jeu de foretsJeu de forets
Jeu de limesJeu de limes
4

Make the rails

Cut two side rails and two end rails of flat bar, his rails B. Bend each end slightly (his offset ends) so it lies flush inside the leg's angle. Drill matching holes through rail ends and legs.

Matériaux pour cette étape :

Plat en acier douxPlat en acier doux1 pièce

Outils nécessaires :

Scie à métauxScie à métaux
Étau d'établiÉtau d'établi
Perceuse à colonnePerceuse à colonne
Jeu de foretsJeu de forets
5

Bolt the base

Bolt each rail end to its leg with a bolt and nut, his bolts f and nuts g. Check the base stands square and level.

Matériaux pour cette étape :

Assortiment de boulons à tête hexagonaleAssortiment de boulons à tête hexagonale1 pièce

Outils nécessaires :

Clé à moletteClé à molette
6

Fit the top

Cut and sand a hardwood top, his top C. Set it on the base and drive a screw up through each leg's lug into it, his screws h. Upholster it if you like, as he allows.

Matériaux pour cette étape :

Planche de bois durPlanche de bois dur1 pièce
Vis à boisVis à bois1 pièce

Outils nécessaires :

Scie égoïneScie égoïne
Papier abrasifPapier abrasif
Jeu de tournevisJeu de tournevis
7

Troubleshooting

Footstool troubleshooting.

Flow

Loading...
8

History and honest limits

**Harry W. Bolens** of Port Washington, Wisconsin, US 640,265, dated 2 January 1900, filed 4 October 1899. He claimed "a footstool-base consisting of legs provided at their upper ends with inwardly-extending flanges as well as horizontal lugs ... apertured for the engagement of top securing devices" and rails between the flanges. His legs and rails were castings, though he does not limit the material; the steel angle and flat bar, the bent lugs, the hardwood top and all sizes are ours.

Matériaux

5

Outils requis

10

Blueprints liés

Ces blueprints partagent des connaissances — techniques, matériaux ou principes

CC0 Domaine public

Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.

Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.

Commentaires

(0)

Se connecter pour participer à la discussion

Chargement des commentaires...