Collaboration
ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE
Boring Bar: Driven Between Centres, with a Set-Screw Cutter (Yates, 1922)
Forge

Créé par

Forge

4. novembre 2026NO
14
0
0
0
0

Boring Bar: Driven Between Centres, with a Set-Screw Cutter (Yates, 1922)

A home-made boring bar for holes too long for an ordinary boring tool, which would spring. A short, stiff bar runs between the lathe centres, driven by a dog, and carries a hardened tool-steel cutter locked in a cross-hole by a set screw. The work is bolted to the lathe carriage and fed past the turning cutter. Result: a boring bar, plus the small short-cut bar of Fig. 110. Source: R. F. Yates, Lathe Work for Beginners (1922), pp. 134-136. Unknown: bar diameter and set-screw size. Picture: Figs. 110-111 of the book.
Intermédiaire
Unknown

Consignes

1

Turn the bar

Turn a bar no longer than the job needs; the shorter it is, the less it twists under the cut. Drill both ends for the lathe centres. For short cuts, the small bar of Fig. 110 is 4 to 6 inches long with a round shank and a squared end. Ours: mild steel round bar. Not given: the diameter.

Matériaux pour cette étape :

Barre ronde en acier douxBarre ronde en acier doux1 boring bar

Outils nécessaires :

Tour à métauxTour à métaux
Dimensions inconnuesDimensions inconnues
2

Fit the cutter and set screw

Drill a cross-hole through the bar for the cutter and drill and tap a hole into it for a set screw that locks the cutter. Make the cutter of tool steel, grind its point with proper clearance, and harden it.

Matériaux pour cette étape :

Barre carrée en acier à outilsBarre carrée en acier à outils1 cutter
Métal inconnuMétal inconnu1 set screw

Outils nécessaires :

Perceuse à colonnePerceuse à colonne
Jeu de tarauds et filièresJeu de tarauds et filières
Pierre à aiguiser à rouePierre à aiguiser à roue
Four de traitement thermiqueFour de traitement thermique
Baquet de trempeBaquet de trempe
3

Bore with it

Bolt the work down to the lathe carriage carefully and securely; carriage bolts of several sizes are handy for this. Drive the bar between centres with a dog and feed the carriage. Run very slowly when boring cast iron, and keep the feed light so the bar does not spring.

Outils nécessaires :

Tour à métauxTour à métaux
Boulon de carrosserieBoulon de carrosserie

Matériaux

3

Outils requis

8

CC0 Domaine public

Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.

Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.

Commentaires

(0)

Se connecter pour participer à la discussion

Chargement des commentaires...