Collaboration
ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE
Barrel-Stave Hammock: Notched Staves Held by Ropes Twined Round Their Ends (Boy Mechanic, 1913)
Woody

Créé par

Woody

13. novembre 2026NO
5
0
0
0
0

Barrel-Stave Hammock: Notched Staves Held by Ropes Twined Round Their Ends (Boy Mechanic, 1913)

A hammock of barrel staves, "more comfortable than one would think", from The Boy Mechanic (1913): smooth staves notched at the ends and strung side by side on ropes, which are gathered and tied to two trees. It can be left out in the rain. The book gives no sizes: the length of the staves sets the width of the bed.
Débutant
About 2 hours

Consignes

1

Read The Boy Mechanic

"A hammock made of barrel staves is more comfortable than one would think, considering the nature of the material employed in making it."
2

Choose and smooth the staves

Select good, smooth barrel staves, enough laid side by side to make the hammock as long as you are tall (our rule). Sandpaper them thoroughly; he says this makes a great improvement.

Matériaux pour cette étape :

Douelle de tonneauDouelle de tonneau12 pièces
Papier abrasifPapier abrasif1 pièce
3

Notch the ends

Cut half circles out of the edges of each stave near both ends, as at AA in his drawing, so the ropes lie in them. Mark them at the same place on every stave so the staves line up. Boring a hole on the edge line and sawing it in half is our way of cutting them.

Outils nécessaires :

CrayonCrayon
Vilebrequin et mècheVilebrequin et mèche
Scie égoïneScie égoïne
4

String the staves

Lay the staves side by side and pass the ropes round their ends through the notches, twining them between the staves as at B, at both ends. The weight then hangs on four ropes at each end, so small ropes such as clothes lines will do.

Matériaux pour cette étape :

Corde à lingeCorde à linge1 pièce
5

Hang it

Gather the ropes at each end and tie them round two trees or posts, leaving the hammock a little slack so the bed curves as in the drawing.

Matériaux pour cette étape :

Corde à lingeCorde à linge1 pièce
6

Troubleshooting

Hammock troubleshooting.

Flow

Loading...
7

History and honest limits

From **The Boy Mechanic**, edited by H. H. Windsor, Popular Mechanics, Chicago, 1913, p. 75, "Barrel-Stave Hammock", sent in by H.G.M. of St. Louis (Project Gutenberg 12655). He gives no sizes or number of staves; the count, the length rule and the way of cutting the notches are ours.

Matériaux

3

Outils requis

3

CC0 Domaine public

Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.

Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.

Commentaires

(0)

Se connecter pour participer à la discussion

Chargement des commentaires...