Collaboration
ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE
Workbench for the Amateur: Mortised Maple Frame, Two-Board Top, Side and End Vises (Boy Mechanic, 1913)
Woody

Créé par

Woody

13. novembre 2026NO
7
0
0
0
0

Workbench for the Amateur: Mortised Maple Frame, Two-Board Top, Side and End Vises (Boy Mechanic, 1913)

A full-size woodworking bench from The Boy Mechanic (Popular Mechanics, 1913), "suitable for the amateur woodworker" and made "by anyone who has a few sharp tools and a little spare time": a mortise-and-tenon frame of birch or maple bolted with lag screws, a top of a 2 in and a 1 in board, a side vise and an end vise on square slides, and a back board. All sizes are the book's. It stands 36 in high, 80 in long and 24 in deep.
Intermédiaire
About 2 days

Consignes

1

Cutting list

Chargement du notebook Jupyter…
2

Read The Boy Mechanic

"If the stock is purchased from the mill ready planed and cut to length, much of the hard labor will be saved."
3

Make the lower frame

Cut tenons on the side and end rails and mortise the posts to take them. Fit them together and fasten them securely with 3/8 by 5 in lag screws through the posts into the rails, as the drawing shows.

Matériaux pour cette étape :

Bois équarriBois équarri1 pièce
Tire-fond (coach screw)Tire-fond (coach screw)1 pièce

Outils nécessaires :

Passe-partoutPasse-partout
Scie à dosseretScie à dosseret
Bédane à mortaiserBédane à mortaiser
Maillet en boisMaillet en bois
Équerre fixeÉquerre fixe
Vilebrequin et mècheVilebrequin et mèche
Clé à moletteClé à molette
CrayonCrayon
4

Fit the crosspieces and top

Screw the 1-1/2 by 3 by 24 in crosspieces to the tops of the posts, countersinking the heads (or bore the top boards to clear them). Fasten the front, 2 in top board to the crosspieces with lag screws from underneath; screw the 1 in top board down from the top.

Matériaux pour cette étape :

Bois équarriBois équarri1 pièce
Planche de bois durPlanche de bois dur1 pièce
Planche de bois durPlanche de bois dur1 pièce
Tire-fond (coach screw)Tire-fond (coach screw)1 pièce
Vis à boisVis à bois1 pièce

Outils nécessaires :

Vilebrequin et mècheVilebrequin et mèche
Jeu de fraises à lamerJeu de fraises à lamer
Jeu de tournevisJeu de tournevis
Clé à moletteClé à molette
5

Fit the end pieces and vise slides

Screw on the end pieces, countersinking the heads at the vise end. Cut 2 in square holes in the 1-1/2 by 4-1/2 by 10 in piece for the side vise slides and fit it in place, and cut square holes in one end piece for the end vise slides.

Matériaux pour cette étape :

Planche de bois durPlanche de bois dur1 pièce
Vis à boisVis à bois1 pièce

Outils nécessaires :

Vilebrequin et mècheVilebrequin et mèche
Ciseaux à boisCiseaux à bois
Maillet en boisMaillet en bois
Jeu de fraises à lamerJeu de fraises à lamer
Jeu de tournevisJeu de tournevis
6

Fit up the two vises

Screw the 2 in square slides (guides) to the two clamp front pieces, countersinking the heads so they are clear of the hands. The clamp screws should be about 1-1/2 in diameter, bought at a hardware store. Fit a block under the crosspiece to hold the end vise's nut. With the slides in place, bore the holes for the clamp screws and fit them.

Matériaux pour cette étape :

Bois équarriBois équarri1 pièce
Planche de bois durPlanche de bois dur1 pièce
Vis d'étau avec levier coulissantVis d'étau avec levier coulissant2 pièces
Vis à boisVis à bois1 pièce

Outils nécessaires :

Vilebrequin et mècheVilebrequin et mèche
Jeu de fraises à lamerJeu de fraises à lamer
Jeu de tournevisJeu de tournevis
7

Back board and finish

Screw the back board to the back as the top view shows. Give the bench "a couple of coats of oil" to finish and preserve the wood (boiled linseed oil, ours).

Matériaux pour cette étape :

Planche de bois durPlanche de bois dur1 pièce
Vis à boisVis à bois1 pièce
Huile de lin cuiteHuile de lin cuite1 pièce
Tissu de cotonTissu de coton1 pièce

Outils nécessaires :

Jeu de tournevisJeu de tournevis
8

Troubleshooting

Workbench troubleshooting.

Flow

Loading...
9

History and honest limits

From **The Boy Mechanic, Volume 1: 700 Things for Boys to Do**, edited by H. H. Windsor, Popular Mechanics, Chicago, 1913 (Project Gutenberg #12655), "A Workbench for the Amateur". All sizes and the fastening are the book's; it names no oil, so boiled linseed oil is ours, as are the metric figures.

Matériaux

8

Outils requis

11

CC0 Domaine public

Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.

Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.

Commentaires

(0)

Se connecter pour participer à la discussion

Chargement des commentaires...