Collaboration
ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE
Brazing Torch: a Pressure-Tank Gasoline or Kerosene Torch (Shop Notes, 1909)
Forge

Créé par

Forge

4. novembre 2026NO
14
0
0
0
0

Brazing Torch: a Pressure-Tank Gasoline or Kerosene Torch (Shop Notes, 1909)

A shop brazing and tempering torch: a wall-hung pipe tank of gasoline or kerosene pumped up with a bicycle pump, feeding a 1/8 in pipe whose end is coiled round a short 1 in pipe; the flame heats the coil, the oil turns to gas, and it blasts out through a pinhole cap. Two burners on a tee give a bigger heat. Source: Popular Mechanics Shop Notes for 1909, pp. 861-862. Picture: the article's drawing.
Intermédiaire
Unknown

Consignes

1

Make the tank

Cap both ends of a 2 in pipe 20 in long. Drill three holes in the top cap: one for the rubber tube from a bicycle pump, one for a steam gauge, and one with a screw plug for filling with fuel oil.

Matériaux pour cette étape :

Tube d'acier (à paroi épaisse, bouts filetés)Tube d'acier (à paroi épaisse, bouts filetés)1 2 in x 20 in
Raccord fileté pour tuyauterieRaccord fileté pour tuyauterie3 two caps, plug
ManomètreManomètre1 pièce
Tube en caoutchoucTube en caoutchouc1 pièce

Outils nécessaires :

Chignole à mainChignole à main
Jeu de tarauds et filièresJeu de tarauds et filières
Clé à tubeClé à tube
Pompe à pied pour véloPompe à pied pour vélo
2

Coil the burner

Drill the bottom cap and connect a 1/8 in pipe D, any length, with a globe valve in it to set and shut off the oil. Fill the last 10 in of the pipe with lead, coil it round a 1 in pipe F 6 in long, and turn the end out to take two elbows and a short nipple; then melt the lead out. Drill a small hole in the centre of a 1/8 in cap and fit it on the end (E) so the hole lines up with the centre of pipe F.

Matériaux pour cette étape :

Tube d'acier (à paroi épaisse, bouts filetés)Tube d'acier (à paroi épaisse, bouts filetés)1 1/8 in, and 1 in x 6 in
Raccord fileté pour tuyauterieRaccord fileté pour tuyauterie4 two elbows, nipple, 1/8 in cap
Robinet à soupapeRobinet à soupape1 pièce

Outils nécessaires :

PlombPlomb
Écumoire perforéeÉcumoire perforée
ForgeForge
Chignole à mainChignole à main
Clé à tubeClé à tube
3

Start the burner

Hang a little cup holding three or four teaspoonfuls of oil just below the coil and light it to heat the coil; then pump up the tank and open the globe valve. For more heat connect two burners on a tee so their blasts meet.

Outils nécessaires :

KérosèneKérosène
Pompe à pied pour véloPompe à pied pour vélo

Matériaux

5

Outils requis

8

CC0 Domaine public

Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.

Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.

Commentaires

(0)

Se connecter pour participer à la discussion

Chargement des commentaires...