Collaboration
ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE

Caliper: Spring-Wire Calipers with a Sliding Loop (Boy Mechanic, 1919)
Quick calipers from one length of spring wire, bent double into two legs, with a loop of heavy wire round the middle that slides along to set the opening.
Variable: points turned in to gauge outside diameters, or out to gauge bores.
Source: The Boy Mechanic, Book 3 (1919), p. 373. Picture: the book's sketch.
Débutant
Unknown
Consignes
1
1
Bend the legs
Bend the legs
Take about 15 in of spring wire and bend it as in the sketch: a round bend at one end and two legs whose tips turn inward (for outside diameters) or outward (for inside ones).
Matériaux pour cette étape :
Fil d'acier à ressort1 15 inOutils nécessaires :
Cisaille à tôle
Étau d'établi2
2
Fit the sliding loop
Fit the sliding loop
Fasten a loop of heavy wire round the middle so it slides back and forth along both legs. Sliding it toward the tips closes the calipers; sliding it back lets them spring open.
Matériaux pour cette étape :
Fil de fer1 heavy wire loopOutils nécessaires :
Cisaille à tôleMatériaux
2- 1 15 inEspace réservé
- 1 heavy wire loopEspace réservé
Outils requis
2- Espace réservé
- Espace réservé
Ce plan fabrique
CC0 Domaine public
Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.
Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.
