Collaboration
ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE

Squirrel-Hair Quill Pencils and Hog-Bristle Brushes (Cennini, c. 1400)
The painter's own brushes from Cennino Cennini's handbook: soft squirrel-tail hairs tied and squeezed into a bird's quill on a spindle-shaped wooden handle, and white hog bristles first broken in on a wall brush, then bound with waxed thread into blunt and pointed brushes of every size.
Débutant
An afternoon (plus breaking in the bristles)
Consignes
1
1
His sizes
His sizes
Chargement du notebook Jupyter…
2
2
Read the Book of the Art
Read the Book of the Art
"In painting, two kinds of brushes are necessary, namely, minever and hog's bristles."
3
3
Keep the tails
Keep the tails
Use dressed (cured) grey-squirrel tails, never raw ones. To keep moths off and the hairs from falling out, stick them tight into kneaded clay or chalk and hang them up; wash them in clean water before use.
Matériaux pour cette étape :
Queues d'écureuil (apprêtées)1 pièce
Argile1 pièce4
4
Bundle the hairs
Bundle the hairs
For a soft gilding pencil, draw the longest hairs from the tips of six or eight tails. For other brushes take the straightest, stiffest hairs from the middle of the tail. Make small bundles, soak them in a glass of clear water, squeeze each with the fingers, and trim them with scissors. Lay the points even and tie each with waxed thread or silk, two knots.
Matériaux pour cette étape :
Queues d'écureuil (apprêtées)1 pièce
Fil de lin ciré1 pièceOutils nécessaires :
Bocal en verre
Ciseaux5
5
Set them in quills
Set them in quills
Take a quill (vulture, goose, hen or dove) to suit the bundle, cut off its end, and push the hairs in, squeezing in as many as you can: the firmer and shorter the brush, the finer work it does. Scrape a small stick of maple, larch, chestnut or other good wood into a smooth spindle that fits tightly into the quill, about a span long. For flat washes blunt the brush a little with scissors and rub it on a smooth stone; keep others to a perfect point for outlines, and some very small for fine work.
Matériaux pour cette étape :
Plumes1 pièce
Goujons de bois dur1 pièceOutils nécessaires :
Ciseaux
Couteau à sculpter sloyd6
6
Break in the bristles
Break in the bristles
Take bristles of a white domestic pig (better than black). Bind a pound of them on a large stick and use it to whitewash and wash walls until the bristles soften.
Matériaux pour cette étape :
Soies de sanglier1 pièce
Goujons de bois dur1 pièce
Fil de lin ciré1 pièceOutils nécessaires :
Couteau à sculpter sloyd7
7
Make the bristle brushes
Make the bristle brushes
Unbind the wall brush and make the bristles up into brushes of all sizes, some blunt (all hairs one length), some pointed. Bind each bundle with a double waxed thread, push the pointed end of a stick into it, bind it evenly for half the length of the bristles and then on down the stick.
Matériaux pour cette étape :
Soies de sanglier1 pièce
Goujons de bois dur1 pièce
Fil de lin ciré1 pièceOutils nécessaires :
Ciseaux
Couteau à sculpter sloyd8
8
Troubleshooting
Troubleshooting
Brush troubleshooting.
Flow
Loading...
9
9
History and honest limits
History and honest limits
From Cennino Cennini, **Il Libro dell'Arte** (c. 1400), translated by Christiana J. Herringham as **The Book of the Art of Cennino Cennini** (1899), chaps. 64-66 (checked on the archive.org scan bookartcenninoc01herrgoog, pp. 52-54). One word in the manuscript, what the wall brush is tied with, is defaced. Herringham explains minever as the grey squirrel. The metric figures and the smooth stone in place of his porphyry are ours.
Matériaux
6- Espace réservé
- 1 pièceEspace réservé
- 3 piècesEspace réservé
- 1 pièceEspace réservé
- 1 pièceEspace réservé
- 1 pièceEspace réservé
Blueprints liés
Ces blueprints partagent des connaissances — techniques, matériaux ou principes
CC0 Domaine public
Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.
Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.


