Collaboration
ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE
Charcoal Finery Iron: the South Wales Process, Ball Hammered into Stamps (Percy, 1864)
Forge

Créé par

Forge

4. novembre 2026NO
9
0
0
0
0

Charcoal Finery Iron: the South Wales Process, Ball Hammered into Stamps (Percy, 1864)

The best iron for charcoal tin-plates, as Percy watched it made at the Morfa Tin-plate Works, Llanelly, on 9 September 1859: pig iron melted under coke in a running-out fire flows into two charcoal fineries, where it is broken up with charcoal, melted down before a cold blast and worked into a ball, which is hammered into a slab and broken into 'stamps'. Charcoal is used because it holds no sulphide of iron, so no sulphur passes into the iron. Source: J. Percy, Metallurgy: Iron and Steel (1864), pp. 581-586. Picture: Fig. 107, the refinery and two charcoal fineries at Morfa.
Avancé
Unknown

Consignes

1

Melt the pig under coke

Melt Pembrokeshire pig iron and Cumberland haematite pig iron together under coke in the running-out fire (melting finery), enough to fill two charcoal fineries: 5 to 6 cwt at Pont-y-Mister; 200 to 250 lb for each finery at Pontypool. Tap it at the bottom so that metal flows first, and keep the slag apart as far as you can. Not given: the proportion of the two pigs.

Matériaux pour cette étape :

Gueuses de fonteGueuses de fonte1 5-6 cwt for two fineries
Coke métallurgiqueCoke métallurgique1 pièce

Outils nécessaires :

Foyer de finerieFoyer de finerie
Machine soufflanteMachine soufflante
2

Fill the charcoal fineries

Run the molten metal into the two charcoal fineries, still hot from the last heat. Take off the slag that comes with it as a crust once it has set. Throw in a basket of charcoal and let the cold blast on full.

Matériaux pour cette étape :

Charbon de bois en morceaux (bois dur)Charbon de bois en morceaux (bois dur)1 a basket per finery, more as needed

Outils nécessaires :

Foyer d'affinerieFoyer d'affinerie
Machine soufflanteMachine soufflante
3

Break up and melt down

Break the friable, half-set metal with an iron bar, mix it with the charcoal and heap it towards the tuyere side, where it melts down before the blast ('sinking a lump'). Throw water on the charcoal at intervals so that it does not burn to waste. Keep loosening and raising the metal from the bottom and the tuyere side.

Outils nécessaires :

TisonnierTisonnier
Foyer d'affinerieFoyer d'affinerie
EauEau
4

Gather the ball

Put back pieces left from the last hammering with a two-pronged fork. Tap off the cinder several times and add charcoal, using the hooks at the sides as fulcra to press loose pieces down onto the ball. Lessen the blast at the end. At Morfa the metal went in at 2 h 10 m and the ball came out at 3 h 23 m.

Outils nécessaires :

TisonnierTisonnier
Foyer d'affinerieFoyer d'affinerie
5

Hammer the ball into a slab

Put the ball under the cam hammer with the tuyere mark facing the hammerman. Hammer it into a narrow slab, rounded at the ends, about 1 3/4 to 2 1/4 in. thick. While it is hot, nick it across deeply in seven or eight places with a chisel-ended bar under the hammer.

Outils nécessaires :

Martinet de forgeMartinet de forge
Tenailles de forgeTenailles de forge
6

Quench and break into stamps

Plunge the nicked slab, still red-hot, into cold water to loosen the oxide. Lay it nicks down across a long ribbed anvil and break it with a narrow-ended sledge into 'stamps' of about 26 lb. Set the end pieces apart, sort the rest by soundness, and return broken bits to the next charge.

Outils nécessaires :

EauEau
Enclume plateEnclume plate
MasseMasse
Tenailles de forgeTenailles de forge

Matériaux

3

Outils requis

9

CC0 Domaine public

Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.

Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.

Commentaires

(0)

Se connecter pour participer à la discussion

Chargement des commentaires...