Collaboration
ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE
Combination Lock: a Five-Disc Drawer Lock (Boy Mechanic, 1915)
Forge

Créé par

Forge

4. novembre 2026NO
18
0
0
0
0

Combination Lock: a Five-Disc Drawer Lock (Boy Mechanic, 1915)

A keyless lock fitted inside a drawer front: five brass discs on a pin, turned by pins from a knob and dial outside. When the notches line up the latch drops; turning back raises it into its keeper. The combination is changed by moving the pins in the discs. Source: The Boy Mechanic, Book 2 (1915), p. 169. Picture: Figs. 1-2 of the book.
Intermédiaire
Unknown

Consignes

1

Cut the five discs

Cut five discs of sheet brass about 1/16 in thick and 1 1/2 in across. Drill each for a driving pin 15/32 in from the centre and press the pin in. Notch discs C, D and E for the latch; shape disc B as a cam to lift the latch into its keeper; leave disc A plain with only its pin (Fig. 1).

Matériaux pour cette étape :

Feuille de laitonFeuille de laiton1 discs
Métal inconnuMétal inconnu1 driving pins

Outils nécessaires :

Compas à pointes sèchesCompas à pointes sèches
Cisaille à tôleCisaille à tôle
Lime à métauxLime à métaux
Chignole à mainChignole à main
MarteauMarteau
2

Mount the discs

Inside the drawer front fit a U-shaped metal bracket F carrying a 1/4 in pin G. Thread the discs on it with rubber washers H to M between them so they don't turn too freely. Fix disc A tight on the end of a 1/4 in rod N that passes out through the front.

Matériaux pour cette étape :

Tôle d'acierTôle d'acier1 U-bracket F
Rond en acier douxRond en acier doux1 pin G, rod N
Matériau inconnuMatériau inconnu5 rubber washers

Outils nécessaires :

Chignole à mainChignole à main
Vilebrequin et mècheVilebrequin et mèche
Cisaille à tôleCisaille à tôle
3

Fit knob, dial and latch

Make the knob of two pieces of wood screwed together with a pointer between them, fit it on rod N with a washer against the drawer. Paste on a paper dial with division marks and numbers. Fit the latch T in a U-shaped metal piece U inside the drawer end so its heel rests on the disc edges, with its keeper above. To find the combination, open the drawer and turn the knob until each notch comes under the latch heel, noting the number under the pointer each time.

Matériaux pour cette étape :

Bloc de bois durBloc de bois dur2 knob
Métal inconnuMétal inconnu1 pointer, latch, keeper
Rondelle plateRondelle plate1 pièce
PapierPapier1 dial
Tôle d'acierTôle d'acier1 U-piece
Vis à boisVis à bois1 pièce

Outils nécessaires :

Tournevis platTournevis plat
Cisaille à tôleCisaille à tôle

Matériaux

9

Outils requis

7

CC0 Domaine public

Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.

Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.

Commentaires

(0)

Se connecter pour participer à la discussion

Chargement des commentaires...