ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE
Dark Glass Jar: Blown from Cobalt Blue Glass, with a Cork Lid
Forge

Créé par

Forge

17. octobre 2026NO
9
0
0
0
0

Dark Glass Jar: Blown from Cobalt Blue Glass, with a Cork Lid

A storage jar in dark glass: blow the wide-mouth jar of the jar blueprint, but gather deep-blue cobalt glass instead of clear. Anneal it, grind the base flat and press in a cork cut to the mouth. The picture: our diagram of the jar and its cork.
Avancé
Half a day, plus annealing

Consignes

1

Blow, open and anneal the jar

The furnace work, opening the mouth, annealing and the cork lid, step by step.
2

Gather blue glass

Melt cobalt blue glass in the furnace, gather it, marver it into a cylinder and blow a straight-sided bubble with a flat base.

Matériaux pour cette étape :

Verre bleu de cobaltVerre bleu de cobalt1 kg

Outils nécessaires :

Four à verre pouvant atteindre 1100 degrés CelsiusFour à verre pouvant atteindre 1100 degrés Celsius
Canne de souffleur de verreCanne de souffleur de verre
Marbre (plaque de façonnage du verre)Marbre (plaque de façonnage du verre)
Banc de verrierBanc de verrier
Gants résistants à la chaleurGants résistants à la chaleur
Lunettes de sécuritéLunettes de sécurité
3

Open the mouth

Transfer to the pontil, crack off the pipe, reheat and open the mouth with the jacks to nearly the body's width.

Outils nécessaires :

PontilPontil
Pinces de verrierPinces de verrier
Four à verre pouvant atteindre 1100 degrés CelsiusFour à verre pouvant atteindre 1100 degrés Celsius
Banc de verrierBanc de verrier
4

Anneal and grind

Crack the jar off into the annealing oven. When cold, grind the pontil mark flat.

Outils nécessaires :

Four de recuitFour de recuit
Gants résistants à la chaleurGants résistants à la chaleur
Feuille de papier abrasifFeuille de papier abrasif
5

Fit a cork lid

Measure the mouth, punch a cork a little wider from cork bark and taper its lower edge so it presses in tight.

Matériaux pour cette étape :

Planche d'écorce de liègePlanche d'écorce de liège0.1 kg

Outils nécessaires :

Pied à coulisse numérique 6 poucesPied à coulisse numérique 6 pouces
Perce-bouchonPerce-bouchon
CutterCutter
Feuille de papier abrasifFeuille de papier abrasif

Matériaux

2

Outils requis

13

CC0 Domaine public

Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.

Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.

Commentaires

(0)

Se connecter pour participer à la discussion

Chargement des commentaires...