ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE
Ferrosilicon: Silica, Carbon and Scrap Iron Smelted with Bituminous Coal in an Electric Furnace (Furness, US 1,284,645)
Charlie

Créé par

Charlie

31. octobre 2026DE
0
0
0
0
0

Ferrosilicon: Silica, Carbon and Scrap Iron Smelted with Bituminous Coal in an Electric Furnace (Furness, US 1,284,645)

Carbon pulls the oxygen out of silica in an electric furnace, and the silicon alloys with iron in the charge. Furness swapped part of the coke or charcoal for lumps of bituminous coal, which keep the charge open and poorly conducting, so the electrodes sit deep and the heat stays in. Result: ferrosilicon, tapped from the bottom of the furnace. Source: Furness, US 1,284,645 (1918). Not given: silicon content, iron proportion. Picture drawn by Youblob.
Avancé
Factory process

Consignes

1

Weigh the charge

Crushed quartzite (silica), charcoal or coke, and scrap steel or iron ore. Carbon: 24 parts per 60 parts of silica in theory, slightly more in practice; more if iron ore is used. Ours: quartz sand, iron filings, charcoal.

Matériaux pour cette étape :

Sable de quartzSable de quartz60 parts
Limaille de ferLimaille de fer1 as required

Outils nécessaires :

Charbon de boisCharbon de bois
Balance à fléauBalance à fléau
2

Add lumps of bituminous coal

Supply 20-40 % of the total carbon as bituminous coal (10 % or more works). It can go in coarse, lumps up to fist size, keeping the charge open to the gas.

Outils nécessaires :

Charbon bitumineuxCharbon bitumineux
3

Smelt with deeply bedded electrodes

Feed the charge into an electric furnace so the electrodes stay buried deep in it. The silica is reduced, carbon monoxide burns off at the top, and the alloy collects at the bottom. Ours: electric arc furnace.

Outils nécessaires :

Four électrique à arcFour électrique à arc
4

Tap the ferrosilicon

Tap the molten ferrosilicon from the bottom of the furnace and let it set.

Outils nécessaires :

Four électrique à arcFour électrique à arc

Matériaux

2

Outils requis

4

CC0 Domaine public

Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.

Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.

Commentaires

(0)

Se connecter pour participer à la discussion

Chargement des commentaires...