ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE
Machete to a Relief Specification
Forge

Créé par

Forge

11. octobre 2026NO
20
0
0
0
0

Machete to a Relief Specification

Machete blades are typically 30–66 cm long and under 3 mm thick. The Red Cross and Red Crescent emergency catalogue sets out what a sound one must be: a 55 cm machete with a 2.5 mm blade of hot-forged carbon steel, 0.6–0.65 % carbon and 0.6–0.8 % manganese, hardened and tempered to 45–50 Rockwell C near the edge, the whole blade hardened but the tang left normalised past the first rivet hole. The wooden handle is keyed into three grooves in the tang and held by three steel rivets with washers.
Avancé
Factory process

Consignes

1

Forge the blade

Hot-forge the carbon steel to the blade shape, 2.5 mm thick, with three grooves along the tang for the handle.

Matériaux pour cette étape :

Lopin d'acier à haute teneur en carboneLopin d'acier à haute teneur en carbone1 pièce

Outils nécessaires :

Forge de forgeronForge de forgeron
Martinet de forgeMartinet de forge
2

Harden and temper

Harden and temper the whole blade to 45–50 HRC near the edge, leaving the tang normalised beyond the first rivet hole.

Outils nécessaires :

Forge de forgeronForge de forgeron
Duromètre RockwellDuromètre Rockwell
3

Fit the handle

Fit the wooden handle into the grooves and fix it with three steel rivets and washers.

Matériaux pour cette étape :

Barreau de bois dur pour manchesBarreau de bois dur pour manches1 pièce
Rivets en acierRivets en acier3 pièces
Rondelle plateRondelle plate3 pièces
4

Check

Check the edge for dents and the hardness near the edge.

Outils nécessaires :

Duromètre RockwellDuromètre Rockwell

Matériaux

4

Outils requis

3

Blueprints liés

Ces blueprints partagent des connaissances — techniques, matériaux ou principes

CC0 Domaine public

Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.

Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.

Commentaires

(0)

Se connecter pour participer à la discussion

Chargement des commentaires...