Collaboration
ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE
Hackle Combs: Coarse and Fine Flax Heckles on One Board (Ure, 1839)
Woody

Créé par

Woody

4. novembre 2026NO
12
0
0
0
0

Hackle Combs: Coarse and Fine Flax Heckles on One Board (Ure, 1839)

A pair of flax heckles on one oblong plank: two round wooden blocks, each faced with a drilled brass or iron plate holding upright iron teeth. Flax is drawn first through the coarse heckle, then through the fine one, splitting the fibres, combing out the short tow and laying the long fibres straight. Coarse: teeth about 1/10 in thick and 1 1/4 in long, a centre tooth and 12 rings, the outer ring 5 3/4 in across. Fine: thinner teeth set closer, 1109 of them. Source: Andrew Ure, Dictionary of Arts, Manufactures and Mines (1839), 'Flax'. Picture: Figs. 424-425 of the book.
Intermédiaire
Unknown

Consignes

1

Make the board and blocks

Cut an oblong plank (Fig. 424, a b) and two round (or square) wooden blocks, c for the coarse heckle and d for the fine, and fix the blocks on the plank (Fig. 425). The heckles can also be made on separate boards.

Matériaux pour cette étape :

Planche de bois durPlanche de bois dur1 pièce
Bloc de bois durBloc de bois dur2 pièces
Vis à boisVis à bois1 pièce

Outils nécessaires :

Scie à dosseretScie à dosseret
Tournevis platTournevis plat
2

Drill the face plates

Cover the top of each block with a brass or iron plate drilled for the teeth, which gives them a firmer hold. Set the holes evenly over the whole face, in concentric circles (the German way) or parallel rows (the English way). Coarse: a centre hole and 12 rings, the outermost 5 3/4 in across. Fine: thinner holes set closer, 1109 in all.

Matériaux pour cette étape :

Feuille de laitonFeuille de laiton2 face plates

Outils nécessaires :

Compas à pointes sèchesCompas à pointes sèches
Cisaille à tôleCisaille à tôle
Chignole à mainChignole à main
3

Make the teeth

Cut teeth of iron (sometimes steel) 1 to 2 in long. For the coarse heckle make them about 1/10 in thick and 1 1/4 in long, tapering from the middle to a very fine point; the fine heckle's teeth are thinner. File every point sharp and smooth, running evenly into the round stem like a sewing needle; square points in a rhombus shape cut the fibres apart better than round ones.

Matériaux pour cette étape :

Fil de ferFil de fer1 teeth

Outils nécessaires :

Cisaille à tôleCisaille à tôle
Lime à métauxLime à métaux
4

Set the teeth

Drive each tooth through its hole in the plate into the block so it stands upright, all points at one level.

Outils nécessaires :

MarteauMarteau

Matériaux

5

Outils requis

7

CC0 Domaine public

Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.

Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.

Commentaires

(0)

Se connecter pour participer à la discussion

Chargement des commentaires...