Collaboration
ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE
Industrial Air Compressor: a Converted Motorcycle Engine, Motor-Driven (Shop Notes, 1919)
Emma

Créé par

Emma

4. novembre 2026SE
8
0
0
0
0

Industrial Air Compressor: a Converted Motorcycle Engine, Motor-Driven (Shop Notes, 1919)

A workshop compressor driven by a 1 hp electric motor: an old single-cylinder motorcycle engine rebored and run as a pump, its exhaust port blanked, its own automatic inlet valve taking in air, and a ball check valve in the spark-plug hole sending air to a tank. Source: Popular Mechanics Shop Notes for 1919, pp. 3166-3167. Unknown: tank, belt and sizes. Picture: the article's drawing.
Intermédiaire
Unknown

Consignes

1

Recondition the cylinder

Rebore the old engine and fit a new piston for good compression. Remove the exhaust valve and bolt a steel plate, with a gasket under it, over the exhaust port. Leave the automatic inlet valve as it is: it now draws in air.

Matériaux pour cette étape :

Matériau inconnuMatériau inconnu1 old motorcycle engine
Ensemble piston et bielleEnsemble piston et bielle1 new piston
Plaque d'acier douxPlaque d'acier doux1 blanking plate
Joint platJoint plat1 pièce
Boulon à tête hexagonale - classe 8.8Boulon à tête hexagonale - classe 8.81 pièce

Outils nécessaires :

Barre d'alésageBarre d'alésage
Tour à métauxTour à métaux
Chignole à mainChignole à main
Clé à moletteClé à molette
2

Fit the outlet

In place of the priming cock on top of the cylinder (the drawing shows it screwed into the spark-plug hole) fit a ball-valve hose connection, and run its hose to the air tank.

Matériaux pour cette étape :

Clapet anti-retour à billeClapet anti-retour à bille1 pièce
Tuyau d'air compriméTuyau d'air comprimé1 pièce
Matériau inconnuMatériau inconnu1 air tank

Outils nécessaires :

Clé à moletteClé à molette
3

Fit the drive and mount it

Fit a longer main shaft and key an ordinary shaft pulley on its end. Leave the old flywheel in place for momentum. Bolt steel lugs to the floor and fasten the engine base to them. Belt it to a 1 hp, 110 volt motor, and put oil in the crankcase for splash lubrication.

Matériaux pour cette étape :

Rond en acier douxRond en acier doux1 longer main shaft
PouliePoulie1 pièce
Plaque d'acier douxPlaque d'acier doux1 floor lugs
Boulon à tête hexagonale - classe 8.8Boulon à tête hexagonale - classe 8.81 pièce
Moteur électriqueMoteur électrique1 1 hp, 110 V
Huile de machineHuile de machine1 pièce

Outils nécessaires :

Tour à métauxTour à métaux
Clé à moletteClé à molette

Matériaux

11

Outils requis

4

CC0 Domaine public

Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.

Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.

Commentaires

(0)

Se connecter pour participer à la discussion

Chargement des commentaires...