ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE
Magnifying Glass from a Hand-Ground Lens
Penny

Créé par

Penny

11. octobre 2026DK
41
0
0
0
0

Magnifying Glass from a Hand-Ground Lens

A magnifying glass is a convex lens in a frame with a handle. A typical one has a focal length of 25 cm, an optical power of 4 dioptres, and is sold as "2×": its magnifying power is 0.25 m × 4 + 1 = 2 for an eye whose near point is 25 cm. Here the lens is ground plano-convex from crown glass (refractive index about 1.52). For a plano-convex lens the focal length is R / (n − 1), so a 25 cm focal length needs a curve of radius about 13 cm. The lens is then set in a turned wooden ring with a handle; those sizes are ours.
Avancé
2–3 days

Consignes

1

Grind the lens

Following the lens-grinding blueprint, grind one face of a glass disc to a spherical curve of about 13 cm radius, working down through the grits, then polish it clear with cerium oxide on a pitch lap. Leave the other face flat.

Matériaux pour cette étape :

Feuille de verreFeuille de verre1 pièce
Colle de poix de pinColle de poix de pin100 g

Outils nécessaires :

RègleRègle
Grains de carbure de siliciumGrains de carbure de silicium
Poudre à polir à l'oxyde de cériumPoudre à polir à l'oxyde de cérium
2

Check the focus

Hold the lens in sunlight and move a card behind it until the spot is smallest; the distance from lens to card is the focal length and should be close to 25 cm. Do not look at the Sun through it.

Outils nécessaires :

RègleRègle
3

Turn the frame

Turn a ring from a hardwood blank with a groove on the inside just wider than the lens edge, and part it off.

Matériaux pour cette étape :

Bloc de bois durBloc de bois dur1 pièce

Outils nécessaires :

Tour à boisTour à bois
GougeGouge
Bédane de tronçonnageBédane de tronçonnage
4

Turn the handle

Turn a handle from a hardwood dowel and fix it into a hole drilled in the ring.

Matériaux pour cette étape :

Goujons de bois durGoujons de bois dur1 pièce
Époxy à deux composantsÉpoxy à deux composants5 ml

Outils nécessaires :

Tour à boisTour à bois
5

Set the lens

Saw the ring through at the handle, spring the lens into the groove, glue the cut closed and wax the wood.

Matériaux pour cette étape :

Cire d'abeilleCire d'abeille10 g

Matériaux

6

Outils requis

6

Blueprints liés

Ces blueprints partagent des connaissances — techniques, matériaux ou principes

CC0 Domaine public

Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.

Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.

Commentaires

(0)

Se connecter pour participer à la discussion

Chargement des commentaires...