Collaboration
ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE

Oven: Insulated Electric Oven with Plug-In Grid Heaters and a Thermostat (Ogden, US 987,161, 1911)
An electric oven built to waste as little heat as possible: a double-walled, packed box with a packed door that seals like a strong-room door. Grid-shaped heating elements slide into grooves in the walls and plug into sockets at the back, and the food rests on them. A thermostat cuts the current when the set temperature is reached and switches it on again as the oven cools.
Result: an oven that bakes, roasts or dries at a set temperature with any number of heating grids.
Source: G. J. Ogden, US 987,161 (1911). Unknown: sizes, metals, packing and temperatures. Picture: the patent drawing.
Avancé
Unknown
Consignes
1
1
Build the insulated casing and door
Build the insulated casing and door
Make the oven chamber as a double-walled casing with packing between the walls, and grooves on the inner side walls to take the heating grids. Fit a door that closes like a fire-proof vault door, also packed, so the casing seals closely. Ours: mild steel sheet. Not given: sizes, the packing.
Matériaux pour cette étape :
Tôle d'acier doux1 inner and outer walls, door
Isolant inconnu1 packingOutils nécessaires :
Cisaille à tôle
Perceuse à colonne
Dimensions inconnues2
2
Make the plug-in heating grids
Make the plug-in heating grids
Make heating elements in the form of grids that slide into the grooves and on which the food can rest. Fix a porcelain plug to each, carrying spring fingers that push into a socket with matching spring fingers in the back wall. Wire the sockets so all the elements are in parallel; use as many as the temperature and amount of food need. Ours: nichrome wire. Not given: the element type.
Matériaux pour cette étape :
Fil de nichrome1 heating grids
Matériau inconnu1 porcelain plugs and sockets
Fil d'acier à ressort1 spring fingers
Fil de câblage1 circuit wiringOutils nécessaires :
Fer à souder3
3
Fit the thermostat control
Fit the thermostat control
Put a thermostat that bends with heat inside the oven, working a contact finger that plays between two contacts a few degrees above and below the set temperature. A switch-changing device, a small rotary motor, throws the main switch off and on as the finger touches one contact or the other. Mount a setting arm with a pointer over a scale marked in degrees, and a second pointer driven by the thermostat. Add a hand switch to turn the current on or off independently, and a lamp with its own switch to light the oven. Ours: a bimetal strip, toggle switches. Not given: temperatures.
Matériaux pour cette étape :
Lame bimétallique1 thermostat
Moteur électrique1 switch-changing motor
Interrupteur à levier3 main, hand and lamp switches
Métal inconnu1 contacts, arm, scale
Matériau inconnu1 incandescent oven lampOutils nécessaires :
Fer à souder
ThermomètreMatériaux
10- 1 inner and outer walls, doorEspace réservé
- 1 packingEspace réservé
- 1 heating gridsEspace réservé
- 1 incandescent oven lampEspace réservé
- 1 spring fingersEspace réservé
- Espace réservé
- 1 thermostatEspace réservé
- 1 switch-changing motorEspace réservé
- Espace réservé
- 1 contacts, arm, scaleEspace réservé
Outils requis
5- Espace réservé
- Espace réservé
- Espace réservé
- 2 vendors sell this, none ship to you yetEspace réservé
- Espace réservé
Matériaux des Blueprints connectés
Ce plan fabrique
CC0 Domaine public
Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.
Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.

