ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE
The Plasma Display Panel
Penny

Créé par

Penny

29. août 2026DK
0
0
0
0
0

The Plasma Display Panel

Bitzer and Slottow, 1964. A quarter-million tiny neon cells behind one glass sheet, each a pixel. The trick is memory: charge stored on an internal dielectric keeps a struck cell lit on a sustain voltage too low to have started it, so the panel holds its image with no refresh. It is the Nixie's glow discharge, engineered into a flat grid.
Avancé
5 hours

Consignes

1

A pixel that is a neon lamp

A plasma cell is a Nixie shrunk to 0.3 mm: same strike and sustain voltages, same Penning gas. Three changes make it a display: a grid of tiny cells; electrodes hidden behind a dielectric that STORES charge; and UV from the discharge lighting red/green/blue phosphors instead of using the neon light directly. Read the embedded Nixie blueprint for the discharge itself.

Outils nécessaires :

Notebook and PencilNotebook and Pencil
2

The memory margin: two voltages, and the gap that stores a bit

Loading Jupyter Notebook...

Outils nécessaires :

Desktop ComputerDesktop Computer
3

Strike one cell on a bench, and find the Paschen minimum

Build one cell and find the Paschen minimum. Two electrodes a few mm apart in a jar on a vacuum pump; HV supply through a series resistor; meter on the strike voltage. Admit gas slowly and the strike voltage falls, hits a MINIMUM, then rises again — the sweet spot where an electron gains enough energy and still finds atoms to hit. Plasma cells sit there, which is why they strike at ~200 V not thousands. HV safety: one hand behind your back, bleeder resistor across the rail, eye protection. Evacuated glass can implode.

Matériaux pour cette étape :

High Voltage Boost Module (170V)High Voltage Boost Module (170V)1 pièce
Neon Indicator LampNeon Indicator Lamp1 pièce
Power Resistor Kit - 10W (25 pack)Power Resistor Kit - 10W (25 pack)1 kit

Outils nécessaires :

Digital Multimeter (Lab Grade)Digital Multimeter (Lab Grade)
Lab Safety Goggles (Chemical Splash)Lab Safety Goggles (Chemical Splash)

Matériaux

3

Outils requis

4
Total estimé
€5.00

Blueprints liés

Ces blueprints partagent des connaissances — techniques, matériaux ou principes

CC0 Domaine public

Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.

Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.

Commentaires

(0)

Se connecter pour participer à la discussion

Chargement des commentaires...