Collaboration
ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE
Self-Healing Cutting Mat: Cork Pinning Side and PVC Cutting Side, Tri-Fold (Carnegie, US 11,077,575)
Emma

Créé par

Emma

9. novembre 2026SE
7
0
0
0
0

Self-Healing Cutting Mat: Cork Pinning Side and PVC Cutting Side, Tri-Fold (Carnegie, US 11,077,575)

A self-healing cutting mat has a PVC face that closes up again after a rotary cutter runs over it. L. V. Carnegie (US 11,077,575, 2021) glues a cork layer to the back of the PVC layer, so the same board takes straight pins on one side and cutting on the other, and scores it so it folds in three for storage. Which PVC heals is not given: Carnegie only says PVC mats are self-healing. Source: L. V. Carnegie, US Patent 11,077,575 (filed 2018, granted 2021). Picture: its Figs. 1 and 3.
Débutant
Unknown

Consignes

1

Read Carnegie

"Polyvinyl chloride (PVC) mats provide a rigid, self-healing surface on which a rotary cutter may be used ... Fabrics and crafts cannot be pinned directly to PVC mats".
2

Cut the two layers

Cut a PVC sheet and a cork sheet to the same size. Carnegie: each layer 1/8 to 1/2 in. thick (cork 1/4 to 1/2 in.); one mat is 72 in. long by 40 in. wide, but any size will do. The PVC grade that self-heals is not given.

Matériaux pour cette étape :

Plaque de PVCPlaque de PVC1 cutting layer, self-healing grade not given
Plaque de liègePlaque de liège1 pinning layer

Outils nécessaires :

CutterCutter
Règle de contrôleRègle de contrôle
Mètre rubanMètre ruban
Dimensions inconnuesDimensions inconnues
3

Glue them back to back

Glue the cork to the back of the PVC so the cork face takes pins and the PVC face takes the cutter. Carnegie allows glue, screws, rivets, magnets or a case; the glue is not given.

Matériaux pour cette étape :

Matériau inconnuMatériau inconnu1 glue, not given

Outils nécessaires :

Rouleau à stratifierRouleau à stratifier
4

Score the folds and mark the grid

Score two lines across the full width, partly or fully through the layers, so the mat folds into three panels with its faces inward. Print measured grid lines on either face, or stick on a printed paper grid. How deep to score is not given.

Outils nécessaires :

CutterCutter
Règle de contrôleRègle de contrôle
5

Use it

Unfold the mat flat. Pin fabric and paper patterns to the cork side; turn it over and cut on the PVC side with a rotary cutter. Fold it up for storage.

Matériaux

3
  • 1 cutting layer, self-healing grade not given
    Espace réservé
  • 1 pinning layer
    Espace réservé
  • 1 glue, not given
    Espace réservé

Outils requis

5

CC0 Domaine public

Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.

Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.

Commentaires

(0)

Se connecter pour participer à la discussion

Chargement des commentaires...