ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE
The Plumb Bob and the Water Level
Every measurement in surveying rests on two directions that nature supplies for free: down, and the surface of still water. A weight on a string finds the first. A liquid in a connected pair of tubes finds the second, and it finds it over any distance, round corners, and through walls.
A spirit level, already published here, is more convenient and far less capable — it is accurate only over its own length, and it cannot tell you whether two corners of a building thirty metres apart are at the same height. A water level can, to a few millimetres, for the price of a garden hose.
The Egyptians used both to set out pyramids. The technique has not improved because it cannot be improved: the water is obeying gravity directly, and there is no instrument error to calibrate out.
Débutant
3 hours
Consignes
1
1
Make a plumb bob that hangs still
Make a plumb bob that hangs still
Hang a symmetrical weight on a fine, non-stretching line. The point must be directly below the attachment, which means the weight has to be symmetrical about its own axis.
A lopsided weight hangs tilted, and the tip is then offset from vertical by an amount you have no way to see. Use a fine braided line rather than twisted, because twisted line unwinds and sets the bob slowly spinning for minutes. In wind, let it swing and read the MIDDLE of the swing — that is the true vertical, and waiting for it to stop is a waste of an afternoon.
Matériaux pour cette étape :
Fil à plomb1 pièce
Fil à plomb10 metre2
2
Build the water level
Build the water level
Fill a long clear tube with water, leaving both ends open, and add a few drops of food colouring so the meniscus is easy to see. Fifteen to twenty metres is practical; the tube only needs to be clear at the two ends.
Get every bubble out. A trapped bubble compresses and shifts under the smallest pressure change, and it will put a silent error of several millimetres into every reading — and unlike almost every other error in this batch it is not random, so averaging will not remove it. Run water through until nothing comes out but water.
Matériaux pour cette étape :
Tuyau vinyle transparent20 metre
Colorant alimentaire1 bouteilleOutils nécessaires :
Seau3
3
Transfer a height across the site
Transfer a height across the site
Hold one end against a mark you have chosen as your reference. Take the other end to wherever you need the same height, raise or lower it until the near water surface sits exactly on the reference mark, and mark the far tube's surface.
Both surfaces are now at the same height, because they are connected by the same body of still water. This works around a corner, up a slope and through a doorway — which is precisely what a straightedge and a spirit level cannot do, and why this tool survives on building sites that own laser levels.
Outils nécessaires :
Mètre ruban4
4
Establish a datum and mark it permanently
Establish a datum and mark it permanently
Choose ONE mark on something immovable — a wall, a driven post, a rock — call it your datum, and write on it what it is.
Every height on the site is then quoted relative to that one mark, and any two measurements can be compared even if they were taken months apart. Heights taken from several different references cannot be compared at all, and this is the commonest way an amateur survey becomes worthless: not through inaccuracy, but because nothing is referenced to anything.
Matériaux pour cette étape :
Piquet en bois4 piècesOutils nécessaires :
Marteau à panne fendue5
5
Check the level against itself
Check the level against itself
Set both ends side by side and confirm the two surfaces read the same. Then transfer a height from A to B, and immediately transfer it BACK from B to A.
If you do not return to the mark you started on, the difference is your error, and you have measured it rather than assumed it. This reciprocal check takes two minutes and is the only honest statement you can make about your own accuracy — everything else is the manufacturer's claim about a different instrument in a different condition.
6
6
Where the errors come from
Where the errors come from
Chargement du notebook Jupyter…
Outils nécessaires :
Mètre ruban7
7
Know when to stop using it
Know when to stop using it
Beyond about thirty metres the hose becomes unmanageable, and over a long line you cannot keep it all at one temperature.
At that point you want the instrument in the fourth rung of this batch, which carries a height by sighting rather than by plumbing. But note what you give up: an optical level has a collimation error that must be found and allowed for, whereas water has none. Every step up in convenience in this batch costs you a new source of error to manage.
Matériaux
5- 1 pièceEspace réservé
- 10 metreEspace réservé
- 20 metreEspace réservé
- 1 bouteilleEspace réservé
- 4 piècesEspace réservé
Blueprints liés
Ces blueprints partagent des connaissances — techniques, matériaux ou principes
CC0 Domaine public
Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.
Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.