Collaboration
ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE

Timber Beams Hewn Square from the Log
Before sawmills, beams for frames and machines were hewn square from the log with axes. Snap a chalk line, score notches down to it, knock out the wood between them (juggling), then hew the face smooth to the line with a broadaxe. Turn the log and do each side.
The picture: shipwrights with broadaxes hewing timbers for a ship, about 1915–1920 (Bain News Service, Library of Congress).
Intermédiaire
A day per beam
Consignes
1
1
Set the log up and mark
Set the log up and mark
Block the log off the ground so it cannot roll. Mark the beam's outline on both ends with the square and snap chalk lines along the log between them.
Matériaux pour cette étape :
Bille de bois1 pièceOutils nécessaires :
Équerre fixe
Cordeau à tracer2
2
Score
Score
Stand on the log and chop notches every 30 cm or so, almost down to the line.
Outils nécessaires :
Hache
Casque de chantier3
3
Juggle
Juggle
Knock off the blocks of wood between the notches with the axe, leaving a rough face just short of the line.
Outils nécessaires :
Hache4
4
Hew to the line
Hew to the line
Hew the face smooth to the chalk line with the broadaxe, working from the bottom of the stem upward.
Outils nécessaires :
Doloire5
5
Turn and repeat
Turn and repeat
Roll the log a quarter turn, snap new lines from the end marks, and hew the next face. Check the corners with the square; dress any high spots with the adze.
Outils nécessaires :
Cordeau à tracer
Équerre fixe
Herminette6
6
The biggest beam in a log
The biggest beam in a log
Chargement du notebook Jupyter…
Matériaux
1- 1 pièceEspace réservé
Blueprints liés
Ces blueprints partagent des connaissances — techniques, matériaux ou principes
CC0 Domaine public
Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.
Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.



