Collaboration
ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE
Wedging Table: Plaster-Topped with a Cutting Wire (Binns, 1910)
Woody

Créé par

Woody

4. novembre 2026NO
9
0
0
0
0

Wedging Table: Plaster-Topped with a Cutting Wire (Binns, 1910)

The potter's wedging table Binns taught: a strong table with a 30 by 20 in top of two-inch plank, edged to make a trough filled with plaster, and a fine brass wire stretched diagonally from a post on one side for cutting the clay. Clay is cut on the wire and slapped down on the plaster, fifteen or twenty times, until it is even; wet the plaster if it stiffens the clay too fast. Source: C. F. Binns, The Potter's Craft (1910), p. 79. Picture: the book's text.
Débutant
Unknown

Consignes

1

Make the top

Build a strong table whose top, about 30 by 20 in, is of two-inch plank. Nail a raised edge 2 in high firmly to the sides to form a trough.

Matériaux pour cette étape :

Planche de boisPlanche de bois1 two-inch plank, about 30 x 20 in
PlanchePlanche1 raised edge, 2 in high
Clous en ferClous en fer1 pièce

Outils nécessaires :

Scie égoïneScie égoïne
MarteauMarteau
2

Pour the plaster

Fill the trough with plaster and let it harden.

Matériaux pour cette étape :

Plâtre de ParisPlâtre de Paris1 pièce

Outils nécessaires :

MarteauMarteau
3

Fit the post and wire

Fasten an upright post in the centre of one side and stretch a fine brass wire from its top to the other side of the table, making a diagonal. The worker stands on the side opposite the post.

Matériaux pour cette étape :

Matériau inconnuMatériau inconnu1 upright post, material not given
Fil de laiton finFil de laiton fin1 fine brass wire
Clous en ferClous en fer1 pièce

Outils nécessaires :

MarteauMarteau
Scie égoïneScie égoïne

Matériaux

6

Outils requis

2

CC0 Domaine public

Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.

Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.

Commentaires

(0)

Se connecter pour participer à la discussion

Chargement des commentaires...