Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
120-Mesh Sieve: U.S. Standard Sieve No. 120 (Bureau of Standards, 1924)
Tex

Dibuat oleh

Tex

3. November 2026FO
8
0
0
1
0

120-Mesh Sieve: U.S. Standard Sieve No. 120 (Bureau of Standards, 1924)

The standard testing sieve No. 120: plain-woven brass or bronze wire cloth with 0.125 mm (0.0049 in) openings and 0.086 mm (0.0034 in) wire, soldered smoothly into a round frame about 20 cm (8 in) across. Result: a sieve that passes grains under 0.125 mm and holds back larger ones, made to the Bureau of Standards tolerances. Source: Bureau of Standards, Letter Circular 74, Standard Specifications for Sieves (revised 1924). Unknown: the frame metal and the weaving. Picture: the Bureau's table.
Menengah
Unknown

Instruksi

1

Weave the wire cloth

Weave plain (not twilled) cloth from brass, bronze or other suitable wire 0.086 mm (0.0034 in) thick, so the openings between adjacent wires are 0.125 mm (0.0049 in) each way, about 120 wires to the inch. Ours: bronze wire. Not given: how it is woven.

Material untuk langkah ini:

Kawat perungguKawat perunggu1 warp and shoot wires

Alat yang dibutuhkan:

Alat tenun kawat kasaAlat tenun kawat kasa
2

Make the frame

Make a circular frame about 20 cm (8 in) across, with about 5 cm (2 in), or 2.5 cm (1 in), between its top and the cloth. Ours: brass strip. Not given: the frame metal.

Material untuk langkah ini:

Pita kuninganPita kuningan1 frame

Alat yang dibutuhkan:

Gunting sengGunting seng
SolderSolder
3

Mount the cloth

Mount the cloth on the frame without distorting it. Fill the joint between cloth and frame smoothly with solder, so the material being sieved cannot catch in it.

Material untuk langkah ini:

Patri timah-timbalPatri timah-timbal1 joint
FluksFluks1 joint

Alat yang dibutuhkan:

SolderSolder
4

Check it against the tolerances

Measure the warp and shoot wires separately. Their average opening must be 0.125 mm within ±6 %, their average diameter 0.086 mm within −15 to +35 %, and no opening may exceed 0.125 mm by more than 40 %. Reject a sieve with punctures, loose or wavy cloth, poor soldering, or too many large openings.

Alat yang dibutuhkan:

MikrometerMikrometer
Kaca PembesarKaca Pembesar

Bahan

4
  • 1 warp and shoot wires
    Placeholder
  • Placeholder
  • Placeholder
  • 1 joint
    Placeholder

Alat yang Diperlukan

5
  • Placeholder
  • Placeholder
  • 2 vendors sell this, none ship to you yet
    Placeholder
  • Placeholder
  • Placeholder

CC0 Domain Publik

Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.

Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

Diskusi

(0)

Masuk untuk bergabung dengan diskusi

Memuat komentar...