SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Activated Alumina: Aluminium Trihydrate Heated at 350 °C While Hot Air Carries the Steam Away (Derr, Alcoa, US 2,015,593)
Charlie

Dibuat oleh

Charlie

30. Oktober 2026DE
0
0
0
0
0

Activated Alumina: Aluminium Trihydrate Heated at 350 °C While Hot Air Carries the Steam Away (Derr, Alcoa, US 2,015,593)

Heating aluminium trihydrate drives out its water and leaves a porous alumina that soaks up moisture. Alcoa's Derr found it works much better when the steam is carried away at once, by a stream of hot air or by a vacuum, instead of lingering in the bed. Result: activated alumina that takes up 14 % of its weight in water from air (8 % made the old way), up to 16 % if washed first in 3 % sulphuric acid. Source: Derr, US 2,015,593 (Alcoa, 1935). Not given: times, bed depth, air rate, amounts. Picture drawn by Youblob.
Menengah
1 day

Instruksi

1

Wash the trihydrate in 3 % sulphuric acid

Before heating, wash the aluminium trihydrate in water containing about 3 % by weight of sulphuric acid. Derr calls this very desirable but not essential: it raises the capacity by about 1-2 %. Ours: stir in a beaker.

Material untuk langkah ini:

Aluminium hidroksidaAluminium hidroksida1 as required

Alat yang dibutuhkan:

Asam sulfat encerAsam sulfat encer
AirAir
Gelas Piala BorosilikatGelas Piala Borosilikat
Batang Pengaduk KacaBatang Pengaduk Kaca
2

Lay it in beds in a chamber

Put the material in beds or layers in a chamber that gas can be drawn through. Ours: a tube furnace.

Alat yang dibutuhkan:

Tungku TabungTungku Tabung
3

Draw air at 350 °C through the bed

Draw air (or combustion gas) heated to about 350 °C through the bed and out of the chamber in a continuous flow, so the steam leaves at once. Temperature: 250-800 °C works, 350-400 °C is best; above 800 °C the alumina changes and loses capacity.

Alat yang dibutuhkan:

Peniup udaraPeniup udara
PirometerPirometer
4

Or heat it under a partial vacuum

Instead of hot air, close the chamber, keep a partial vacuum in it and heat above 250 °C and below 800 °C; 300-400 °C on a large scale. The steam passes quickly out of the chamber.

Alat yang dibutuhkan:

Pompa vakumPompa vakum
PirometerPirometer
5

Keep it dry

The product takes up about 14 % of its weight of water from air, 16 % if acid-washed. Ours: store it in an airtight container until use.

Alat yang dibutuhkan:

Wadah simpan kedap udaraWadah simpan kedap udara

Bahan

1

Alat yang Diperlukan

9

Cetak biru ini membuat

Blueprint terkait

Blueprint ini berbagi pengetahuan — teknik, bahan, atau prinsip

CC0 Domain Publik

Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.

Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

Diskusi

(0)

Masuk untuk bergabung dengan diskusi

Memuat komentar...