Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Air Compressor: Twin Pump-Cylinder, Water-Cooled (Shop Notes, 1912)
Emma

Dibuat oleh

Emma

4. November 2026SE
9
0
0
0
0

Air Compressor: Twin Pump-Cylinder, Water-Cooled (Shop Notes, 1912)

A simple compressor that fills a tank to about 50 lb: two bought cast-iron well-pump cylinders, 2 1/2 in bore, driven alternately by a rocking arm from a crank, with check valves in and out and a water jacket pipe to cool them. Source: Popular Mechanics Shop Notes for 1912, pp. 1708-1709. Unknown: tank, pipe sizes. Picture: Figs. 1-2 of the book.
Menengah
Unknown

Instruksi

1

Pipe the two cylinders

Take two ordinary cast-iron open-well pump cylinders, 2 1/2 in bore, bought complete with guide rods and plungers. Join their open ends with tees to a cross pipe C, and fit a packing box from an old valve (A, B) into each tee so the plunger rods D and E pass through (Fig. 1).

Material untuk langkah ini:

Logam tidak diketahuiLogam tidak diketahui2 pump cylinders with plungers
Pipa baja (berdinding tebal, ujung berulir)Pipa baja (berdinding tebal, ujung berulir)1 pipe C
Sambungan pipa berulirSambungan pipa berulir2 tees
Paking tidak diketahuiPaking tidak diketahui2 packing boxes

Alat yang dibutuhkan:

Kunci pipaKunci pipa
2

Fit the valves

On the outer end of each cylinder fit an inlet check valve (H, I) and an outlet valve (J, K), the outlets joined to pipe L running to the tank.

Material untuk langkah ini:

Katup searahKatup searah4 H, I, J, K
Pipa baja (berdinding tebal, ujung berulir)Pipa baja (berdinding tebal, ujung berulir)1 pipe L
Sambungan pipa berulirSambungan pipa berulir1 buah
Bahan tidak diketahuiBahan tidak diketahui1 air tank

Alat yang dibutuhkan:

Kunci pipaKunci pipa
3

Water-cool it

Run cooling water through pipe C, set by valve M in and valve N out, so there is no pressure on the water to push it into the air chambers O and P.

Material untuk langkah ini:

Katup globeKatup globe2 M and N

Alat yang dibutuhkan:

AirAir
Kunci pipaKunci pipa
4

Fit the crank drive

Drive it from a shaft (Fig. 2): crank S works an arm pivoted at its centre T, and the plunger rods D and E attach to the arm's ends U and V.

Material untuk langkah ini:

Logam tidak diketahuiLogam tidak diketahui1 crank, arm
Baut kepala segi enam - mutu 8.8Baut kepala segi enam - mutu 8.81 pivot and rod pins, number not given

Alat yang dibutuhkan:

Bor tanganBor tangan
Kunci InggrisKunci Inggris

Bahan

8

Alat yang Diperlukan

4
  • Placeholder
  • Placeholder
  • Placeholder
  • Placeholder

CC0 Domain Publik

Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.

Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

Diskusi

(0)

Masuk untuk bergabung dengan diskusi

Memuat komentar...