Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI

English
Aluminium Powder: Molten Aluminium Shot into Water, then Stamped
Aluminium powder is the fuel of the thermit reaction that turns metal oxides into metal. Thorpe (1912) gives how it was made: molten aluminium poured into water, and the small irregular fragments, once dry, pounded under stamp-mills until fine enough. Molten metal and water: face shield, gloves, and pour slowly. Keep the powder away from flame.
The picture: aluminium powder (Wikimedia Commons).
Menengah
1 day
Instruksi
1
1
Melt the aluminium
Melt the aluminium
Melt 200 g of aluminium in a crucible in the furnace.
Material untuk langkah ini:
Batangan aluminium200 gAlat yang dibutuhkan:
Neraca lengan
Kowi
Tungku Arang
Penjepit Kowi
Pelindung Wajah
Sarung Tangan Kulit2
2
Pour it into water
Pour it into water
Stand back behind the face shield and pour the metal slowly, in a thin stream, into a bucket of cold water. It sets as small irregular fragments.
Alat yang dibutuhkan:
Air
Ember logam bertutup
Penjepit Kowi
Pelindung Wajah
Sarung Tangan Kulit3
3
Dry the fragments
Dry the fragments
Lift the fragments out with a skimmer and dry them completely.
Alat yang dibutuhkan:
Serok berlubang4
4
Stamp to powder
Stamp to powder
Pound the dry fragments under the stamp mill until the powder is fine. Sieve, return the coarse part to the stamps, and keep the powder in a closed jar.
Alat yang dibutuhkan:
Penumbuk Bijih
Ayakan Halus
Toples Kaca BertutupBahan
1- 200 gPlaceholder
Alat yang Diperlukan
12- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Cetak biru ini membuat
CC0 Domain Publik
Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.
Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.
