SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI

Barium Peroxide: Barium Oxide Heated in Air
Barium oxide takes oxygen from the air at about 500 °C and becomes barium peroxide; above 820 °C it gives the oxygen back. The Brin process used this to separate oxygen from air, and the peroxide was once the source of hydrogen peroxide. It is an oxidiser and harmful if swallowed.
The picture: barium peroxide on a watch glass.
Menengah
A day
Instruksi
1
1
Spread it thin
Spread it thin
Crush the barium oxide, weigh it, and spread it thin in an open iron crucible so the air can reach it.
Material untuk langkah ini:
Barium oksida150 gAlat yang dibutuhkan:
Lumpang dan Alu
Neraca lengan
Kowi besi
Masker Debu
Sarung tangan karet2
2
Heat in air
Heat in air
Hold the open crucible at about 500 °C in the furnace, checked with the pyrometer, stirring now and then with an iron rod. Never let it go above 820 °C, or the oxygen leaves again.
Alat yang dibutuhkan:
Tungku Arang
Arang
Pirometer
Batang besi bulat
Penjepit Kowi
Sarung tangan las
Kacamata Pelindung Cipratan Kimia3
3
Weigh until done
Weigh until done
Lift it out each hour, let it cool a little and weigh it. When it stops gaining, it is peroxide (step 4). Keep it in a dry, closed jar away from anything that burns.
Alat yang dibutuhkan:
Neraca lengan
Penjepit Kowi
Stoples Kaca
Sarung tangan las4
4
Follow the weight
Follow the weight
Memuat notebook Jupyter…
Bahan
1- 150 gPlaceholder
Alat yang Diperlukan
13- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Cetak biru ini membuat
Blueprint terkait
Blueprint ini berbagi pengetahuan — teknik, bahan, atau prinsip
CC0 Domain Publik
Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.
Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

