SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Pop Rivets: Hollow Rivet on a Break-Off Former Shank (Cherry 1939)
A rivet you set from one side. Cherry threaded a hollow rivet onto a shank with a bevelled head, the former, at the far end. Pull the shank while pushing on the rivet head and the former spreads the rivet's tail against the back of the work. A groove in the shank makes it break at a set pull, so every rivet is set to the same tightness.
Source: Carl W. Cherry, US 2,183,543 (1939). Unknown: the metal and the dimensions. Cherry gives neither, so both are linked to unknown heads. Turning the parts on a lathe and setting them with a pop rivet gun are ours. Picture: the patent's drawing.
Lanjutan
1 day
Instruksi
1
1
Turn the hollow rivet
Turn the hollow rivet
Turn a tubular rivet with a head formed at one end and a passage right through it. Unknown: the metal and the sizes.
Material untuk langkah ini:
Logam tidak diketahui1 as requiredAlat yang dibutuhkan:
Mesin Bubut Logam
Set pahat bubut (HSS)
Jangka Sorong Vernier
Dimensi tidak diketahui2
2
Turn the former shank
Turn the former shank
Turn a shank that slides through the rivet's passage, with a former head at one end: no wider than the rivet, and bevelled on its inner edge where it meets the rivet's tail. The bevel sets the angle the tail spreads to. Cut a groove around the shank where it should break.
Material untuk langkah ini:
Logam tidak diketahui1 as requiredAlat yang dibutuhkan:
Mesin Bubut LogamSet pahat bubut (HSS)Jangka Sorong VernierDimensi tidak diketahui3
3
Assemble and set
Assemble and set
Push the shank through the rivet so the former sits against the tail. Put the rivet into matching holes in the work. Press on the rivet head and pull the shank at the same time (Cherry's tool: a casing with a dolly on the head, and a shank holder pulled by cammed handles; ours: a pop rivet gun). The former spreads the tail against the far plate. Then the shank breaks at its groove, and the broken pieces fall out of the passage.
Alat yang dibutuhkan:
Mesin Bor Duduk
Set pistol paku keling
Kacamata pengamanBahan
1- 1 as requiredPlaceholder
Alat yang Diperlukan
7- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Cetak biru ini membuat
Blueprint terkait
Blueprint ini berbagi pengetahuan — teknik, bahan, atau prinsip
CC0 Domain Publik
Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.
Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.