Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Knock-Down Footstool: Bolted Metal Legs and Rails Under a Screwed-On Wooden Top (Bolens, 1900)
Forge

Dibuat oleh

Forge

13. November 2026NO
7
0
0
0
0

Knock-Down Footstool: Bolted Metal Legs and Rails Under a Screwed-On Wooden Top (Bolens, 1900)

Harry W. Bolens of Port Washington, Wisconsin, received US 640,265, dated 2 January 1900, for a footstool whose base comes apart: four metal corner legs and four rails bolted together, with a wooden top screwed on through lugs on the legs. It packs flat for storage and shipping. His legs were ornamental castings; ours are bent from steel angle. All sizes are ours.
Pemula
About 4 hours

Instruksi

1

Cut list

Memuat notebook Jupyter…
2

Read US 640,265

"The above-described base has the advantage of being a knockdown structure, and thus I provide for economical storage and transportation."
3

Make the legs

Cut four legs of steel angle to the notebook's length, his corner legs A. At the top of each, cut and bend a small tab inward to make the flange and lug (his b and c), and drill the lug for a top screw. File off sharp edges.

Material untuk langkah ini:

Besi siku baja lunakBesi siku baja lunak1 buah

Alat yang dibutuhkan:

Gergaji BesiGergaji Besi
Ragum MejaRagum Meja
Palu kepala bulatPalu kepala bulat
Mesin Bor DudukMesin Bor Duduk
Set Mata BorSet Mata Bor
Set KikirSet Kikir
4

Make the rails

Cut two side rails and two end rails of flat bar, his rails B. Bend each end slightly (his offset ends) so it lies flush inside the leg's angle. Drill matching holes through rail ends and legs.

Material untuk langkah ini:

Besi Strip Baja LunakBesi Strip Baja Lunak1 buah

Alat yang dibutuhkan:

Gergaji BesiGergaji Besi
Ragum MejaRagum Meja
Mesin Bor DudukMesin Bor Duduk
Set Mata BorSet Mata Bor
5

Bolt the base

Bolt each rail end to its leg with a bolt and nut, his bolts f and nuts g. Check the base stands square and level.

Material untuk langkah ini:

Aneka baut segi enamAneka baut segi enam1 buah

Alat yang dibutuhkan:

Kunci InggrisKunci Inggris
6

Fit the top

Cut and sand a hardwood top, his top C. Set it on the base and drive a screw up through each leg's lug into it, his screws h. Upholster it if you like, as he allows.

Material untuk langkah ini:

Papan Kayu KerasPapan Kayu Keras1 buah
Sekrup kayuSekrup kayu1 buah

Alat yang dibutuhkan:

Gergaji TanganGergaji Tangan
AmplasAmplas
Set obengSet obeng
7

Troubleshooting

Footstool troubleshooting.

Flow

Loading...
8

History and honest limits

**Harry W. Bolens** of Port Washington, Wisconsin, US 640,265, dated 2 January 1900, filed 4 October 1899. He claimed "a footstool-base consisting of legs provided at their upper ends with inwardly-extending flanges as well as horizontal lugs ... apertured for the engagement of top securing devices" and rails between the flanges. His legs and rails were castings, though he does not limit the material; the steel angle and flat bar, the bent lugs, the hardwood top and all sizes are ours.

Bahan

5

Alat yang Diperlukan

10

Cetak biru ini membuat

CC0 Domain Publik

Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.

Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

Diskusi

(0)

Masuk untuk bergabung dengan diskusi

Memuat komentar...