SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI

Bone Folder Cut from a Leg Bone
A bone folder is a dull-edged tool for folding and creasing paper in bookbinding; traditionally it is cut from the leg bone of a cow or deer, which leaves little residue on the paper. Clean a leg bone, saw a strip from the thick wall of its shaft, shape one end round and the other to a blunt point, and smooth and polish it.
The picture: two bone folders, one straight and one tapered.
Pemula
An afternoon
Instruksi
1
1
Clean the bone
Clean the bone
Simmer the leg bone in water until the meat and fat come away, scrub it, and let it dry for several days.
Material untuk langkah ini:
Tulang1 buah
Air5 literAlat yang dibutuhkan:
Ketel Besi
Perapian terbuka2
2
Saw a strip
Saw a strip
Saw off the knobbly ends, then saw a strip about 2.5 cm wide and 15–20 cm long lengthways from the thick wall of the shaft. Wear a mask; bone dust is fine.
Alat yang dibutuhkan:
Gergaji Coping
Ragum Meja
Masker Debu3
3
Shape it
Shape it
File the strip flat on both faces, round one end and taper the other to a blunt point. Keep every edge dull. Drill a small hole for a hanging cord if you like.
Alat yang dibutuhkan:
Kikir Logam
Ragum Meja
Bor tangan4
4
Smooth and polish
Smooth and polish
Sand it smooth with finer and finer paper, then rub it on the strop until it is glossy and slides over paper without catching.
Alat yang dibutuhkan:
Amplas
Strop kulit5
5
Strips from one bone
Strips from one bone
Memuat notebook Jupyter…
Alat yang Diperlukan
9- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Cetak biru ini membuat
Blueprint terkait
Blueprint ini berbagi pengetahuan — teknik, bahan, atau prinsip
CC0 Domain Publik
Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.
Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

