Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Ice Glider: Three-Skate Push Scooter With a Steering Crosspiece and Spiked Pusher (Boy Mechanic, 1915)
Woody

Dibuat oleh

Woody

13. November 2026NO
8
0
0
0
0

Ice Glider: Three-Skate Push Scooter With a Steering Crosspiece and Spiked Pusher (Boy Mechanic, 1915)

Mildred E. Thomas's ice glider from The Boy Mechanic, Book 2 (1915), "similar to an ice yacht, only a great deal smaller": a 40 in rear board on one skate, bolted to a 30 in front crosspiece on two skates tilted about 30 deg, with a 26 in upright and a handle to steer. It is pushed along with a spiked block strapped to one shoe.
Pemula
About 1 day

Instruksi

1

Her sizes, and the skate angle

Memuat notebook Jupyter…
2

Read The Boy Mechanic, Book 2

"The enthusiastic pushmobilist need not put aside his hobby during the winter, as an amusement device for use on ice, which will surpass the very best pushmobile, can be easily made as shown in the illustration."
3

Make the front crosspiece

Cut the front crosspiece 30 in long and about 8 in wide, with its front and back edges cut on a slant. Fasten a tapering block to each end so that the skates on them stand at an angle of about 30 deg, edges outward, and fix a skate to each block with screws through holes drilled in the top plates (or with straps).

Material untuk langkah ini:

Papan pinusPapan pinus1 buah
Papan Kayu KerasPapan Kayu Keras1 buah
Sepatu seluncur esSepatu seluncur es2 buah
Sekrup kayuSekrup kayu1 buah

Alat yang dibutuhkan:

Gergaji TanganGergaji Tangan
Ketam tanganKetam tangan
Busur DerajatBusur Derajat
Bor tanganBor tangan
PensilPensil
Meteran GulungMeteran Gulung
4

Build the upright and handle

In the centre of the crosspiece build an upright 26 in high: nail a piece to its front and back edges so that, on the slanted edges, they stand sloping toward the rear. Fasten a handle 24 in long between the two uprights at the top.

Material untuk langkah ini:

Papan pinusPapan pinus1 buah
Papan Kayu KerasPapan Kayu Keras1 buah
PakuPaku1 buah
Sekrup kayuSekrup kayu1 buah

Alat yang dibutuhkan:

Gergaji TanganGergaji Tangan
PaluPalu
Bor tanganBor tangan
5

Make the rear board and join it

Cut the rear board 8 in wide and 40 in long and fasten the third skate in a perfectly straight position on its rear end. Bore a hole in the front end of the board and bolt it to the centre of the front crosspiece, so the crosspiece turns to guide the glider.

Material untuk langkah ini:

Papan pinusPapan pinus1 buah
Sepatu seluncur esSepatu seluncur es1 buah
Baut kepala bulat leher persegiBaut kepala bulat leher persegi1 buah
Ring RataRing Rata2 buah
Sekrup kayuSekrup kayu1 buah

Alat yang dibutuhkan:

Gergaji TanganGergaji Tangan
Bor engkol dan mata borBor engkol dan mata bor
Bor tanganBor tangan
6

Make the pusher

Drive nails through a block of wood so their points project on the underside, and strap the block to one shoe. Or use sole leather instead of the block, with small slots cut in the sides for the straps and nails driven through so the points project. Push the glider along like a pushmobile.

Material untuk langkah ini:

Papan Kayu KerasPapan Kayu Keras1 buah
PakuPaku1 buah
Tali KulitTali Kulit1 buah

Alat yang dibutuhkan:

Gergaji TanganGergaji Tangan
PaluPalu
7

Troubleshooting

Ice glider troubleshooting.

Flow

Loading...
8

History and honest limits

From "An Ice Glider" by Mildred E. Thomas, in **The Boy Mechanic, Book 2**, Popular Mechanics, 1915 (Project Gutenberg 44585; checked on the archive.org scan boymechanicbook200chic2, pp. 31-32). She gives no board thicknesses, bolt size or block taper, only the 30 deg skate angle. The tools and metric figures are ours.

Bahan

8

Alat yang Diperlukan

8
  • Placeholder
  • Placeholder
  • Placeholder
  • Placeholder
  • 1 vendor sell this, none ship to you yet
    Placeholder
  • 1 vendor sell this, none ship to you yet
    Placeholder
  • Placeholder
  • Placeholder

Cetak biru ini membuat

CC0 Domain Publik

Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.

Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

Diskusi

(0)

Masuk untuk bergabung dengan diskusi

Memuat komentar...