Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI

Leather Punch from an Old Pipe Nipple: Edge Ground Thin, Slug Slot Cut Above (Boy Mechanic, 1915)
A shop-made hollow punch for round holes in leather from The Boy Mechanic, Book 2 (1915): an old pipe nipple of the size you need, one end ground on the outside to a very thin cutting edge, and a small slot a little above it to push the leather slugs out.
Pemula
Half an hour
Instruksi
1
1
Read the tip
Read the tip
"The cutter end can be ground very thin to prevent an over-cut, while a small slot cut a little above it will allow the removal of the leather slugs."
2
2
Choose the pipe
Choose the pipe
Pick an old pipe nipple whose bore matches the hole you want: pieces of almost any size turn up around a shop. If the piece is long, saw it to a handy length (ours).
Material untuk langkah ini:
Pipa baja (berdinding tebal, ujung berulir)1 buahAlat yang dibutuhkan:
Ragum Meja
Gergaji Besi3
3
Grind the cutter end
Grind the cutter end
Grind one end on the outside to a long bevel, leaving a very thin edge round the bore, as the hatched section in the sketch shows. Keep turning the pipe so the edge stays even.
Alat yang dibutuhkan:
Gerinda duduk4
4
Cut the slug slot
Cut the slug slot
A little above the edge, cut a small slot through the wall (the sketch shows a triangle) to push the slugs out. Ours: drill a hole and file it to shape.
Alat yang dibutuhkan:
Ragum Meja
Mesin Bor Duduk
Kikir (Kikir Tangan)
Kikir jarum5
5
Punch
Punch
Ours: lay the leather on end-grain wood, stand the punch upright and strike the top with a mallet. Poke the slugs out through the slot.
Alat yang dibutuhkan:
Palu Kayu6
6
Troubleshooting
Troubleshooting
Punch troubleshooting.
Flow
Loading...
7
7
History and honest limits
History and honest limits
From "Pipe Used as a Leather Punch", **The Boy Mechanic, Book 2** (Popular Mechanics, 1915), p. 138 (checked on the archive.org scan boymechanicbook200chic2). The note gives no sizes; the way the slot is cut, the length and the striking method are ours.
Bahan
1- Placeholder
Alat yang Diperlukan
7- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Cetak biru ini membuat
Blueprint terkait
Blueprint ini berbagi pengetahuan โ teknik, bahan, atau prinsip
CC0 Domain Publik
Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.
Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.


